mypros+
Model reference

KitchenAid KGRA806PSS00

Range

14 documents60 error codes4 service modes

Available documentation

Tech Sheet

  • tech sheet 975766512 pg
    Covers this model

Service Manual

  • Technical Education Job Aid 4317367 KAC-42 Self-cleaning Slide-in/freestanding Gas Ranges84 pg
    Covers this model
  • FAILURE CODES AND WIRING DIAGRAMS for WHIRLPOOL AND KITCHENAID SLIDE-IN & FREESTANDING GAS & ELECTRIC RANGES80 pg
    Covers this model

Service Flash

  • Service Pointer - KitchenAid Gas Freestanding and Slide-In Ranges1 pg
    Covers this model
  • Service Pointer - 8178519 (Gas Oven Will Not Reignite During Cooking Cycles)2 pg
    Covers this model
  • Service Pointer - 8178525 (Cook Cycles Cancel)1 pg
    Covers this model
  • Service Pointer K81786211 pg
    Covers this model
  • Service Pointer - 8178621 - No Power to Oven2 pg
    Covers this model
  • Service Pointer - Oven Temperature Calibration1 pg
    Covers this model
  • Service Pointer - 8178524 (Oven Temperatures)1 pg
    Covers this model

Bulletin

  • Service Pointer - 8178557 - Unit Does Not Work After Self-Clean Cycle2 pg
    Covers this model

Other

  • 81785251 pg
    Covers this model

Installation Guide

  • Installation Instructions36 pg
    Covers this model
  • Instruction Sheet2 pg
    Covers this model
MyPros+ Max

Diagnose your KitchenAid KGRA806PSS00.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (60)

CodeMeaning
F0 E0No failure (default state).F0E0No failure (default state).F1 E0Internal error (display board related).F1 E1Internal error (display board related).F1 E2Internal error (display board related).F1 E3Internal error (display board related).F1 E4Internal error (display board related).F1 E5Internal error (power board related).F1 E6Internal error (power board related).F1 E7Internal error (power board related).F1 E8Internal error (power board related).F1 E9Internal error (display board related).F1E0Internal error on display board.F1E1Internal error on display board.F1E2Internal error on display board.F1E3Internal error on display board.F1E4Internal error on display board.F1E5Internal error on power board.F1E6Internal error on power board.F1E7Internal error on power board.F1E8Internal error on power board.F1E9Internal error on display board.F2 E0Stuck key (shorted key) on keypad.F2 E1Keypad disconnected.F2E0Stuck key (shorted key) on keypad.F2E1Keypad disconnected.F3 E0Main oven sensor open (top oven sensor opened).F3 E1Main oven sensor shorted (top oven sensor shorted).F3 E2Meat probe shorted.F3 E4Bottom oven sensor open (bottom/lower oven sensor open).
View all 60 error codes
F3 E5Bottom oven sensor shorted (lower oven sensor shorted).F3 E6Warming drawer sensor open.F3 E7Warming drawer sensor shorted.F3E0Main oven temperature sensor open (top oven sensor opened).F3E1Main oven temperature sensor shorted (top oven sensor shorted).F3E2Meat probe sensor shorted.F3E4Bottom oven temperature sensor open (bottom oven sensor open).F3E5Bottom oven temperature sensor shorted (lower sensor short).F3E6Warming drawer sensor open.F3E7Warming drawer sensor shorted.F4 E2Over temperature during cook mode (temperature runaway).F4 E3Over temperature during clean mode (temperature runaway).F4 E7Over temperature cavity 2 (temperature runaway error).F4E2Over temperature during cook mode (temperature runaway error).F4E3Over temperature during clean mode (temperature runaway error).F4E7Over temperature in oven cavity 2 (temperature runaway error).F5 E0Door latch mismatch (door and latch switches do not agree).F5 E1No operating latch / latch not operating.F5 E2Door switch fault.F5 E4Latch switch fault.F5 E7Unlock door error (cannot unlock door).F5E0Door latch mismatchF5E1Latch not operating (no operating latch).F5E2Door switch fault.F5E4Latch switch fault.F5E7Cannot unlock door (unlock door error).F6 E4Lost communication between power board and display board.F6 E5Cancel key error.F6E4Lost communication between display board and power board.F6E5Cancel key error.

Service modes (4)

  • Diagnostic mode["Press the Cancel key to place the range in an idle state (to recall last failure code if not…
  • Error Code RecallPress Cancel key to place range in idle state, then press Cancel, Cancel, Start
  • Hidden EOC Functions (Options)Press and hold the appropriate key for 5 seconds
  • Manual DiagnosticsWithin 120 seconds of power up, press Cancel, Cancel, Start.

Full entry steps, exit procedures, and test sequences are available in Max.

Related KitchenAid range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass