Model reference

LG L8UC1008FA1

Name: LG L8UC1008FA1
Brand: LG

Air Conditioner

2 documents13 error codes18 service modes

Available documentation

Service Manual

Multi Type Air Conditioner SERVICE MANUAL160 pg
Covers this model
Multi Type Air Conditioner SERVICE MANUAL157 pg
Covers this model

MyPros+ Max

Diagnose your LG L8UC1008FA1.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·LG Air Conditioner

01 on my LG L8UC1008FA1

M+

Indoor room thermistor error

From Service Manual 460822, p.34:

1.Access service mode to confirm the active fault code and read stored error history.

2.Disconnect the sensor and measure resistance. Expected: 10 kΩ to 12 kΩ at 77°F (25°C).

3.Check the sensor harness for opens. A reading outside 5 kΩ to 50 kΩ indicates a failed sensor.

Part 6322FR2046G

Temperature thermistor

Error codes (13)

CodeMeaning

01Indoor room thermistor error (open/short circuit).02Indoor inlet pipe thermistor error (open/short circuit).03Wired remote controller communication error (open/short/wrong connection).04Drain pump / float switch error (float switch open, normally should be short).05Communication error between indoor and outdoor unit (indoor side display).06Indoor outlet pipe thermistor error (open/short circuit).33Discharge pipe temperature high (compressor discharge sensor temperature high).44Outdoor air thermistor error (open/short circuit).45Condenser pipe thermistor error (open/short circuit).47Constant compressor discharge pipe thermistor error (open/short circuit).51Capacity error (over capacity combination of indoor units).53Communication error between indoor and outdoor unit (outdoor side display).54Phase error on outdoor unit 3-phase power supply.

Service modes (18)

Address Monitoring (Wireless Remote Controller)Press Chaos Swing (6) and Reset (13) keys simultaneously to enter Address Monitoring Mode.
address_monitoring_wirelessPress Chaos Swing (6) and Reset (13) keys simultaneously to enter Address Monitoring Mode
address_setting_wired1) Press Program (13) and Set/Clear (16) keys simultaneously for more than 3 seconds to enter…
address_setting_wired_remocon["Press Program (key 13) and Set/Clear (key 16) simultaneously for more than 3 seconds to enter…
address_setting_wireless1) Press Jet Cool (5) and Reset (13) keys simultaneously for more than 3 seconds to enter Address…
address_setting_wireless_remocon["Press Jet Cool (key 5) and Reset (key 13) simultaneously for more than 3 seconds to enter Address…
ESP (External Static Pressure) Setting (Duct Type)1
esp_setting["Push the On/Off button to start the unit.","Push the Timer and Wind button simultaneously for…
Forced Operation (Cassette Type)Press the button for 2 seconds to start forced operation.
Forced Operation (Slide Switch)Switch the slide switch on the main indoor unit to the forced operation position while power is on…
forced_operation["Locate the forced operation slide switch on the main unit.","Switch the slide switch from remote…
forced_operation_cassettePress the forced operation button on the cassette type unit for 2 seconds.
Indoor Unit Address Setting (Wired Remote Controller)1
Indoor Unit Address Setting (Wireless Remote Controller)1
Test Run (Cassette Type)Press the button for 5 seconds to start the test run.
Test Run (Room/Split Type)Press the timer cancel button five times continuously on the remote controller.
test_run_cassettePress the forced operation button on the cassette type unit for 5 seconds.
test_run_room_typePress the Timer Cancel button five times continuously on the room type remote controller.

Full entry steps, exit procedures, and test sequences are available in Max.

Related LG air conditioner models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass