Magic Chef 16TB-3BK

Available documentation

Error codes (51)

Service modes (21)

• 12 hour shut off disable/enablePress and hold the CLOCK key for 5 seconds.
• 12 hour shut-offPress and hold TIMER OFF key for 5 seconds.
• Audible signal pitch controlPress and hold DELAY START key for 5 seconds.
• Bake Temperature Offset AdjustmentPress BAKE pad for 5 seconds
• Cavity Size ProgrammingWithin 60 seconds of power up, press the following touchpads in sequence
• Cooktop lockoutPress and hold the TOP/TOP LIGHT keypad on the control panel for 5 seconds
• Disable/Enable all tones (except end-of-timer and error tones)Press and hold COOK TIME key for 5 seconds.
• Disable/Enable all tones except end-of-timer and error tonesPress and hold the COOK TIME key for 5 seconds.
• Disable/Enable cycle and timer-end repeating tonesPress and hold TIMER SET key for 5 seconds.
• Fahrenheit to Celsius conversionPress and hold BROIL key for 5 seconds.
• Last error code recallPress and hold CANCEL/OFF key for 5 seconds until last error code is displayed.
• Recall last failure codePress and hold the CANCEL/OFF key for 5 seconds
• Sales demonstration modePress and hold START/ENTER key for 5 seconds.
• Self-Diagnostic / Touch Panel and PCBA Test["Press and hold the STOP/CLEAR button while opening the door.","While still holding the STOP/CLEAR…
• Software revision numberPress and hold TIME key for 5 seconds.
• Temperature Adjustment (Calibration)Press and hold BAKE pad for 5 seconds
• Temperature Calibration AdjustmentPress and hold BAKE pad for 5 seconds. Current offset is shown in display (CAL shown in 4-digit…
• Temperature calibration offsetPress and hold BAKE pad for 5 seconds
• Test mode (diagnostic)Within 60 seconds of power up, simultaneously hold down the BAKE and CLOCK keys for 5 seconds
• Test mode readoutAfter entering test mode, press the arrow down key to cycle through
• Verify fuel typePress and hold START/ENTER key for 5 seconds

Full entry steps, exit procedures, and test sequences are available in Max.