Model reference
Magic Chef 22RW-3BK
Range
4 documents38 error codes10 service modes
Available documentation
Tech Sheet
- TECH SHEET10 pg
- Instruction Sheet - Tech Sheet8 pg
- Instruction Sheet - 9756206 - Rev B4 pg
- Tech Sheet - W100467208 pg
MyPros+ Max
Diagnose your Magic Chef 22RW-3BK.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax
Error codes (38)
CodeMeaning
:Power failure indicationF0Default F codeF0 E0No error(s) foundF01Temperature sensor opened (open circuit detected in oven temperature sensor).F02Welded element relays (element relay contacts have welded closed).F03EEPROM error (internal memory fault in electronic control).F05Door or latch problems (fault detected in door latch assembly, switches, or…F06Electronic control malfunction.F1 E0EEPROM communications error.F1 E1EEPROM checksum failure.F1 E2UL A/D error(s).F1-E0Key held down too long or key is shorted.F1-E1Keypad keytail not connected.F1-E2UL A/D error(s).F1-E5CANCEL key drive line open.F1-E6CANCEL key drive line open.F2Touch panel failure.F2 E0Shorted key.F2 E1Keytail unplugged.F2-E0Temperature sensor opened.F2-E1Temperature sensor shorted.F3 E0Oven sensor opened.F3 E1Oven sensor shorted.F3 E2BAKE/BROIL range over temperature.F3 E3CLEAN range over temperature.F3-E0Oven temp too highF3-E1Oven temp too highF3-E2BAKE/BROIL range over temperature.F3-E3CLEAN range over temperature.F5 E0Door and switches do not agree.View all 38 error codes
F5 E1Door latch not operating.F5 E2Latch error during CLEAN.F5-E0Door is open, but latch is locked (door switch closed indicating open door, and…F5-E1Self-clean latch will not lock.F5-E2Latch error during CLEAN.F5-E5Self-clean temperature 288°C (550°F) not reached within 45 minutes.F5-E7Self-clean latch will not unlock.F6Return line not connected
Service modes (10)
- Bake Temperature Offset Adjustment1
- Fahrenheit to Celsius ConversionPress the BROIL pad for 5 seconds
- Fault Code DisplayPress and hold OVEN CANCEL key for 5 seconds.
- Last Error Code Recall["Press and hold CANCEL/OFF key for 5 seconds.","Last error code is displayed."]
- Last fault code displayPress and hold CANCEL/OFF key for 5 seconds
- Programming the Cavity Size1. Within 60 seconds of power up, press the following touchpads: OVEN CANCEL, WARM HOLD, BAKE, TEMP…
- Self-diagnostic test mode (Touch Panel and PCBA Test)["Press and hold the OFF/CANCEL button while opening the door.","While still holding the OFF/CANCEL…
- Temperature Adjustment (Calibration)Press and hold BAKE pad for 5 seconds
- Temperature Calibration Adjustment["Press and hold BAKE pad for 5 seconds.","Current offset (if any) is shown in the display (3-digit…
- Test mode (diagnostic)Within 60 seconds of power up, simultaneously hold down the BAKE and CLOCK keys for 5 seconds
Full entry steps, exit procedures, and test sequences are available in Max.
Related Magic Chef range models
75,000+ service documents · 20,000+ error codes · 100+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax