Model reference
Magic Chef BT16KA-4ST
Range
1 document35 error codes9 service modes
Available documentation
Service Manual
- Slide-in Electric Range62 pg
MyPros+ Max
Diagnose your Magic Chef BT16KA-4ST.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (35)
CodeMeaning
1c1cShorted key detected on the control circuit board.1c2cKeyboard tail disconnected from the control circuit board.1c31Cancel key circuit problem (improper value).1c32Cancel key circuit problem (improper value).1c4cPower micro communication failure (CRC invalid).1c6cEEPROM error1c7cControl not calibrated1c81Cook profile corrupted in EEPROM (CRC invalid) for upper/single oven cavity.1c82Cook profile corrupted in EEPROM (CRC invalid) for lower oven cavity.1d11Runaway temperature (650°F) with door unlocked1d12Runaway temperature (650°F) with door unlocked1d21Runaway temperature (950°F) with door locked1d22Runaway temperature (950°F) with door locked3d11Oven temperature sensor failure (open)3d12Oven temperature sensor failure (open)3d21Oven temperature sensor failure (short)3d22Oven temperature sensor failure (short)3d41Meat probe shorted3d51Meat probe not calibrated4d11Door switch position failure4d12Door switch position failure4d21No Reverse Airflow Fan rotation (no/low RPM), upper/single oven.4d22No Reverse Airflow Fan rotation (no/low RPM), lower oven.4d31Reverse Airflow Fan state error4d32Reverse Airflow Fan state error4d41High Reverse Airflow Fan rotation (high RPM), upper/single oven.4d42High Reverse Airflow Fan rotation (high RPM), lower oven.4d51Door switch circuit failure4d52Door switch circuit failure9d11Door latch will not lockService modes (9)
- 24-Hour Clock TogglePress and hold CANCEL and DELAY pads for 3 seconds
- Child Lockout (Control Lock)Press and hold CANCEL and COOK & HOLD pads for 3 to 5 seconds until beep sounds.
- Clock Display TogglePress and hold CANCEL and CLOCK pads for 3 to 5 seconds.
- Diagnostic Code Display Mode1
- Factory Default ResetPress and hold CANCEL and KEEP WARM pads for 3 to 5 seconds.
- Oven Temperature Adjustment (Hidden Function)1
- Quick Test Mode1. Press and hold CANCEL and BROIL pads for 3 seconds. 2. Once the control has entered Quick Test…
- Sabbath ModeHold CLOCK pad for 3 to 5 seconds to activate Sabbath mode.
- Temperature Display Toggle (°F/°C)Press and hold CANCEL and BAKE pads for 3 to 5 seconds
Full entry steps, exit procedures, and test sequences are available in Max.
Related Magic Chef range models
75,000+ service documents · 20,000+ error codes · 100+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass