Model reference
Maytag 16026484F
Range
2 documents13 error codes14 service modes
Available documentation
Tech Sheet
- Tech Sheet - 16026484F (FR)10 pg
- Cuisinière électrique autoportante — Informations techniques10 pg
MyPros+ Max
Diagnose your Maytag 16026484F.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax
Error codes (13)
CodeMeaning
1c1cKey stuck (short-circuited key detected).1c2cKeyboard loop disconnected (incorrect keyboard loop value).1c31Cancel key circuit problem (incorrect Cancel key value).1c6cEEPROM error (no response from EEPROM).1c7cControl not calibrated (calibration value out of limits).1c8cCooking program error (incorrect cyclic redundancy check).1d11Runaway temperature (343°C / 650°F) with door unlocked; oven temperature sensor…1d21Runaway temperature (510°C / 950°F) with door locked; oven temperature sensor…3d11Sensor open circuit (sensor resistance reads infinite/open).3d21Sensor short circuit (sensor resistance reads 0 ohms).4d11Door switch not closed when door is locked.4d51Door switch is neither open nor closed (door switch error).9d11Door lock switch not closedService modes (14)
- 12-Hour Auto Shutoff DisableNormally the control auto-cancels all cooking and disables relay drivers 12 hours after last key…
- 12-Hour Shutoff DisableThe control automatically cancels any cooking and disables all relay drivers 12 hours after the…
- 12/24 Hour Clock TogglePress and hold Cancel and Delay keys simultaneously for 3 to 5 seconds. Then press More + or Less
- 24-Hour Clock TogglePress and hold Cancel and Delay keys simultaneously for 3 to 5 seconds
- Child Safety LockPress and hold Cancel and Cook & Hold keys simultaneously for 3 to 5 seconds until a beep sounds.
- Clock Display Toggle (on/off)Press and hold Cancel and Clock keys simultaneously for 3 to 5 seconds.
- Default Configuration ResetPress and hold Cancel and Keep Warm keys simultaneously for 3 to 5 seconds until a beep is heard.
- Diagnostic Code Display ModeWithin 60 seconds of powering on the appliance, press and hold the More+ key
- Factory Default ResetPress and hold Cancel and Keep Warm keys simultaneously for 3 to 5 seconds until a beep sounds.
- Oven Temperature Calibration Adjustment1
- Quick Test Mode (Factory Verification Mode)1
- Sabbath Mode1
- Temperature Display (F/C toggle)Press and hold Cancel and Bake keys simultaneously for 3 to 5 seconds
- Time Display TogglePress and hold Cancel and Clock keys simultaneously for 3 to 5 seconds.
Full entry steps, exit procedures, and test sequences are available in Max.
Related Maytag range models
75,000+ service documents · 20,000+ error codes · 100+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax