mypros+
Model reference

Maytag AER5735QAN

Range

12 documents36 error codes57 service modes

Available documentation

Tech Sheet

  • Tech Sheet - 160256489 pg
    Covers this model
  • Electric Freestanding Range⎯Technical Information9 pg
    Covers this model

Service Manual

  • Service Manual - 1602248736 pg
    Covers this model
  • Service Manual - Electric Freestanding Range36 pg
    Covers this model
  • Maytag Heritage Wiring Diagrams _ Fault Codes MC 1124 pg
    Covers this model
  • FAILURE CODES AND WIRING DIAGRAMS for MAYTAG HERITAGE GAS & ELECTRIC RANGES124 pg
    Covers this model

Bulletin

  • Technical Bulletin - Wiring replacement dual infinite switch1 pg
    Covers this model
  • Technical Bulletin - TDC-0090-B Wiring replacement dual infinite switch1 pg
    Covers this model
  • Technical Bulletin1 pg
    Covers this model
  • Technical Bulletin - Door Glass Rattle1 pg
    Covers this model
  • TechnicalBulletin - TDC-0029-B - Automatic Oven Light Operation1 pg
    Covers this model
  • Technical Bulletin - Automatic Oven Light Operation1 pg
    Covers this model
MyPros+ Max

Diagnose your Maytag AER5735QAN.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (36)

CodeMeaning
1c1cShorted key detected on control board keyboard.1c2cKeyboard tail disconnected from control board.1c31Cancel key circuit problem (cavity 1 / upper oven).1c32Cancel key circuit problem (cavity 2 / lower oven).1c4cPower micro communication failure (CRC invalid).1c6cEEPROM error1c7cControl not calibrated1c81Cook profile corrupted in EEPROM for upper/single oven cavity (CRC invalid).1c82Cook profile corrupted in EEPROM for lower oven cavity (CRC invalid).1c8cCooking program error1d11Runaway oven temperature (650°F) detected with door unlocked (cavity 1).1d12Runaway oven temperature (650°F) detected with door unlocked (cavity 2).1d21Runaway oven temperature (950°F) detected with door locked (cavity 1).1d22Runaway oven temperature (950°F) detected with door locked (cavity 2).3d11Oven temperature sensor open circuit (cavity 1).3d12Oven temperature sensor open circuit (cavity 2).3d21Oven temperature sensor shorted (cavity 1).3d22Oven temperature sensor shorted (cavity 2).3d41Meat probe shorted3d51Meat probe not calibrated4d11Door switch position failure4d12Door switch position failure4d21No reverse airflow fan rotation detected (no or low RPM).4d22No Reverse Airflow Fan rotation (no/low RPM) on lower oven cavity.4d31Reverse airflow fan is on when it should be off.4d32Reverse Airflow Fan state error4d41High Reverse Airflow Fan rotation (high RPM) on upper/single oven cavity.4d42High Reverse Airflow Fan rotation (high RPM) on lower oven cavity.4d51Door switch circuit failure4d52Door switch circuit failure
View all 36 error codes
9d11Door latch will not lock9d12Door latch will not lock9d21Door latch will not unlock9d22Door latch will not unlock9d31Door latch state unknown9d32Door latch state unknown

Service modes (57)

  • 24 Hour Clock TogglePress and hold Cancel and Favorite pads for 3 seconds.
  • 24 Hour Clock Toggle (H1 Control)Press and hold Cancel and Favorites pads for 3 seconds.
  • 24 Hour Clock Toggle (M1 Control)Press and hold Cancel and Delay pads for 3 seconds.
  • 24 Hour Clock Toggle (M2 Control)Press and hold Cancel and Favorite pads for 3 seconds.
  • Child Lock OutPress and hold Cancel and Cook & Hold pads for 3 seconds
  • Child Lock Out (H1 Control)Press and hold Cancel and Cook & Hold pads for 3 seconds
  • Clock Display Toggle (H1/M1/M2)Press and hold Cancel and Clock pads for 3 seconds.
  • Clock Display Toggle (On/Off)Press and hold Cancel and Clock pads for 3 seconds.
  • Diagnostic Code Display1
  • Diagnostic Code Display (H1 Control)Press and hold AUTOSET pad for 3 seconds at power-up
  • Diagnostic Code Display (M1/M2 Control)Press and hold Up Arrow pad and power up the unit simultaneously
  • Diagnostic Code Display Mode (H1 Control)Press and hold AUTOSET pad for 3 seconds at power-up
  • Diagnostic Code Display Mode (H1 Controls)Press and hold AUTOSET pad for 3 seconds at power-up.
  • Diagnostic Code Display Mode (H1)Press and hold the Autoset pad for 3 seconds at power-up.
  • Diagnostic Code Display Mode (H2.5)Press and hold Upper Cancel and Autoset pads for 3 seconds
  • Diagnostic Code Display Mode (H3 Controls)Press and hold Upper Cancel and Timer for 3 to 5 seconds within 5 minutes of power up.
  • Diagnostic Code Display Mode (H3)Press and hold Upper Cancel and Timer for 3 to 5 seconds within 5 minutes of power up
  • Diagnostic Code Display Mode (M1 Control)Press and hold Up Arrow pad and power up the unit
  • Diagnostic Code Display Mode (M1/M2)Diagnostic Code Display Mode can only be started within 30 seconds when powering up the control.
  • Diagnostic Code Display Mode (M2 Control)Press and hold Up Arrow pad and power up the unit
  • Diagnostic Code Display Mode (NSC Controls)Press and hold the More + pad for 3 to 5 seconds when powering up the unit (within 60 seconds of…
  • Diagnostic Code Display Mode (NSC)Press and hold More + pad for 3 to 5 seconds within 60 seconds of powering up the unit. Cycle…
  • Factory Default ResetPress and hold Cancel and Keep Warm pads for 3 seconds.
  • Factory Default Reset (H1/M1/M2)Press and hold Cancel and Keep Warm pads for 3 seconds.
  • Faults Access (EOC III Controls)1
  • Faults Access (EOC III)1
  • One-Watt Standby Mode (NSC Controls)Press and hold Cancel and Less
  • One-Watt Standby Mode (NSC)Press and hold Cancel and Less
  • Oven Temperature Adjustment1
  • Oven Temperature Adjustment (H1 Control)1
  • Oven Temperature Adjustment (M1/M2 Control)1
  • Quick Test1. Press and hold CANCEL and BROIL pads for 3 seconds. 2. Once the control has entered Quick Test…
  • Quick Test (H1 Control)1
  • Quick Test (M1 and M2 Controls)1
  • Quick Test (M1/M2 Control)1
  • Quick Test Mode (EOC III Controls)1
  • Quick Test Mode (EOC III)1
  • Quick Test Mode (H1 Controls - Convection Model)1
  • Quick Test Mode (H1 Controls - Non-Convection Model)1
  • Quick Test Mode (H1 Convection Model)1. Press and hold Cancel and Broil pads for 3 seconds. 2. Release both pads. 3. Press pads
  • Quick Test Mode (H1 Non-Convection Model)1. Press and hold Cancel and Toast pads for 3 seconds. 2. Release both pads. 3. Press pads
  • Quick Test Mode (H2/H2.5 Control)1. Press and hold Cancel and Broil pads for 3 to 5 seconds. 2. Release both pads. 3. Press pads
  • Quick Test Mode (H2/H2.5 Controls)1
  • Quick Test Mode (H3 Control)1. Press and hold Upper Cancel and Broil pads for 3 seconds. 2. Release both pads. 3. Press pads
  • Quick Test Mode (H3 Controls)1
  • Quick Test Mode (M1/M2 Control)1. Press and hold Cancel and Broil pads for 3 seconds. 2. Release both pads. 3. Press pads
  • Quick Test Mode (M1/M2 Controls)1
  • Quick Test Mode (NSC Non-Self Clean Controls)1
  • Quick Test Mode (NSC Non-Self Cleaning Control)1. Press and hold Cancel and Broil pads for 3 to 5 seconds within 5 minutes of power-up. 2. Release…
  • Sabbath ModeHold CLOCK button for 3 seconds to activate Sabbath mode.
  • Sabbath Mode (H1/M1/M2)Hold CLOCK pad for 3 seconds to activate
  • Service Mode (EOC III Controls)1
  • Service Mode (EOC III)1
  • Temperature Display Toggle (F/C)Press and hold Cancel and Bake pads for 3 seconds.
  • Temperature Display Toggle (H1/M1/M2)Press and hold Cancel and Bake pads for 3 seconds.
  • Test Mode (UH Control)1
  • Test Mode (UH Controls)1

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag range models

75,000+ service documents · 20,000+ error codes · 100+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass