Model reference
Maytag AES5830BA
Range
6 documents27 error codes9 service modes
Available documentation
Tech Sheet
- Electric Slide-In Range—Technical Information9 pg
Bulletin
- Bulletin technique - TDC-0094-B-French Hot Surface Indicator Light Change1 pg
Installation Guide
- Installation Bulletin - IDC-0013-B Filler Kit2 pg
- Bulletin d'installation - Trousse de panneau latéral IDC-0014-B-F2 pg
- Installation Bulletin - IDC-0014-B Side Panel Kit2 pg
- Installation Bulletin - Slide-In Ranges Side Panel Kit Installation Instructions2 pg
MyPros+ Max
Diagnose your Maytag AES5830BA.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (27)
CodeMeaning
1c1cShorted key detected on the control circuit board.1c2cKeyboard tail disconnected; keyboard loop returns improper value.1c31Cancel key circuit problem; cancel key returns improper value.1c32Cancel key circuit problem; cancel key returns improper value.1c6cEEPROM error; no response from EEPROM after 3 tries.1c7cControl not calibrated; calibration value out of range.1c8cCooking program error; CRC invalid after 3 tries.1d11Runaway temperature (650°F) detected with door unlocked; sensor resistance >…1d12Runaway temperature (650°F) detected with door unlocked; sensor resistance >…1d21Runaway temperature (950°F) detected with door locked; sensor resistance > 2787…1d22Runaway temperature (950°F) detected with door locked; sensor resistance > 2787…3d11Temperature sensor open; sensor resistance reads infinite ohms.3d12Temperature sensor open; sensor resistance reads infinite ohms.3d21Temperature sensor shorted; sensor resistance reads 0 ohms.3d22Temperature sensor shorted; sensor resistance reads 0 ohms.4d11Door switch position failure; door switch not closed when door is locked.4d12Door switch position failure; door switch not closed when door is locked.4d21No reverse airflow fan rotation detected (no or low RPM).4d31Reverse airflow fan is on when it should be off.4d51Door switch circuit failure; door switch not open or closed as expected.4d52Door switch circuit failure; door switch not open or closed as expected.9d11Latch will not lock; lock switch not closed when expected.9d12Latch will not lock; lock switch not closed when expected.9d21Latch will not unlock; unlock switch not closed when expected.9d22Latch will not unlock; unlock switch not closed when expected.9d31Latch state unknown; both locked and unlocked switches indicate active…9d32Latch state unknown; both locked and unlocked switches indicate active…Service modes (9)
- 24 Hour Clock TogglePress and hold Cancel and Favorite pads for 3 to 5 seconds.
- Child LockoutPress and hold Cancel and Cook & Hold pads for 3 to 5 seconds
- Clock Display Toggle (On/Off)Press and hold Cancel and Clock pads for 3 to 5 seconds.
- Diagnostic Code Display ModePress and hold the AUTOSET pad for 3 to 5 seconds at power-up
- Factory Default ResetPress and hold Cancel and Keep Warm pads for 3 to 5 seconds.
- Oven Temperature Adjustment1
- Quick Test ModePress and hold CANCEL and BROIL pads simultaneously for 3 to 5 seconds
- Sabbath ModeHold CLOCK pad for 3 to 5 seconds to activate
- Temperature Display Toggle (°F/°C)Press and hold Cancel and Bake pads for 3 to 5 seconds.
Full entry steps, exit procedures, and test sequences are available in Max.
Related Maytag range models
75,000+ service documents · 20,000+ error codes · 100+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass