mypros+
Model reference

Maytag AGR5735QDS

Range

13 documents36 error codes38 service modes

Available documentation

Tech Sheet

  • techsheet-16022500.pdf9 pg
    Covers this model

Service Manual

  • Maytag Freestanding Range Repair Service Manual42 pg
    Covers this model
  • Service Manual - Gas Freestanding Range42 pg
    Covers this model
  • Maytag Heritage Wiring Diagrams _ Fault Codes MC 1124 pg
    Covers this model

Bulletin

  • Technical Bulletin - Surface Valve Replacement Availability1 pg
    Covers this model
  • Technical Bulletin - LP Conversion Kits1 pg
    Covers this model
  • Technical Bulletin - Gas Valve Regulator1 pg
    Covers this model
  • Technical Bulletin - TDC-0075-B Gas Valve Regulator1 pg
    Covers this model
  • Technical Bulletin1 pg
    Covers this model
  • Technical Bulletin - Door Glass Rattle1 pg
    Covers this model
  • TechnicalBulletin - TDC-0029-B - Automatic Oven Light Operation1 pg
    Covers this model
  • Technical Bulletin - TDC-0086-B-French Clock fails or fades out when using bake or broil function1 pg
    Covers this model
  • Technical Bulletin - Automatic Oven Light Operation1 pg
    Covers this model
MyPros+ Max

Diagnose your Maytag AGR5735QDS.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (36)

CodeMeaning
1c1cShorted key detected on the control circuit board.1c2cKeyboard tail disconnected from the control board.1c31Cancel key circuit problem (cancel key improper value).1c32Cancel key circuit problem (cancel key improper value, second instance).1c4cPower micro communication failure (CRC invalid).1c6cEEPROM error1c7cControl not calibrated1c81Cook profile corrupted in EEPROM (CRC invalid) for upper/single oven.1c82Cook profile corrupted in EEPROM (CRC invalid) for lower oven.1c8cCooking program error1d11Runaway temperature (650°F) detected with door unlocked; sensor resistance >…1d12Runaway temperature (650°F) detected with door unlocked (second instance)…1d21Runaway temperature (950°F) detected with door locked; sensor resistance > 2787…1d22Runaway temperature (950°F) detected with door locked (second instance); sensor…3d11Oven temperature sensor open3d12Oven temperature sensor open (second instance)3d21Oven temperature sensor shorted3d22Oven temperature sensor shorted (second instance)3d41Meat probe shorted (probe resistance < 0 ohms).3d51Meat probe not calibrated (calibration value out of range).4d11Door switch position failure4d12Door switch position failure (second instance)4d21No reverse airflow fan rotation (no or low RPM detected).4d22No Reverse Airflow Fan rotation (no/low RPM) in lower oven.4d31Reverse airflow fan is on when it should be off.4d32Reverse Airflow Fan state error4d41High Reverse Airflow Fan rotation (high RPM) in upper/single oven.4d42High Reverse Airflow Fan rotation (high RPM) in lower oven.4d51Door switch circuit failure4d52Door switch circuit failure (second instance)
View all 36 error codes
9d11Latch will not lock9d12Latch will not lock (second instance)9d21Latch will not unlock9d22Latch will not unlock (second instance)9d31Latch state unknown9d32Latch state unknown

Service modes (38)

  • 24 Hour Clock TogglePress and hold Cancel and Favorite pads for 3 seconds.
  • 24 Hour Clock Toggle (H1/M2 Control)Press and hold Cancel and Favorite pads for 3 seconds.
  • 24 Hour Clock Toggle (M1 Control)Press and hold Cancel and Delay pads for 3 seconds.
  • Child Lock OutPress and hold Cancel and Cook & Hold pads for 3 seconds
  • Child Lock Out (H1/M1/M2 Control)["Press and hold Cancel and Cook & Hold pads for 3 seconds.","'OFF' will display where temperature…
  • Child LockoutPress and hold Cancel and Cook & Hold pads for 3 seconds
  • Clock Display TogglePress and hold Cancel and Clock pads for 3 seconds.
  • Diagnostic Code DisplayPress and hold the AUTOSET pad for 3 seconds at power-up (can only be started while powering up the…
  • Diagnostic Code Display Mode (H1 Control)Press and hold the AUTOSET pad for 3 seconds at power-up
  • Diagnostic Code Display Mode (H1)Press and hold the Autoset pad for 3 seconds at power-up.
  • Diagnostic Code Display Mode (H2.5)Press and hold Upper Cancel and Autoset pads for 3 seconds
  • Diagnostic Code Display Mode (H3)Press and hold Upper Cancel and Timer for 3 to 5 seconds within 5 minutes of power up
  • Diagnostic Code Display Mode (M1 Control)["Press and hold Up Arrow pad and power up the unit.","Cycle through the codes using the number…
  • Diagnostic Code Display Mode (M1/M2 Control)Press and hold the Up Arrow pad and power up the unit
  • Diagnostic Code Display Mode (M1/M2)Diagnostic Code Display Mode can only be started within 30 seconds when powering up the control.
  • Diagnostic Code Display Mode (M2 Control)["Press and hold Up Arrow pad and power up the unit.","Cycle through the codes using the number…
  • Diagnostic Code Display Mode (NSC)Press and hold More + pad for 3 to 5 seconds within 60 seconds of powering up the unit. Cycle…
  • Factory Default ResetPress and hold Cancel and Keep Warm pads for 3 seconds.
  • Faults Access (EOC III)1
  • One-Watt Standby Mode (NSC)Press and hold Cancel and Less
  • Oven Temperature Adjustment1
  • Oven Temperature Adjustment (H1 Control)["Press BAKE pad.","Enter 550 on the digit-pad.","Immediately press and hold BAKE pad for 3…
  • Oven Temperature Adjustment (H1/M1/M2 Control)1
  • Quick Test1. Press and hold CANCEL and BROIL pads for 3 seconds. 2. Once the control has entered Quick Test…
  • Quick Test Mode (EOC III)1
  • Quick Test Mode (H1 Control)1
  • Quick Test Mode (H1 Convection Model)1. Press and hold Cancel and Broil pads for 3 seconds. 2. Release both pads. 3. Press pads
  • Quick Test Mode (H1 Non-Convection Model)1. Press and hold Cancel and Toast pads for 3 seconds. 2. Release both pads. 3. Press pads
  • Quick Test Mode (H2/H2.5 Control)1. Press and hold Cancel and Broil pads for 3 to 5 seconds. 2. Release both pads. 3. Press pads
  • Quick Test Mode (H3 Control)1. Press and hold Upper Cancel and Broil pads for 3 seconds. 2. Release both pads. 3. Press pads
  • Quick Test Mode (M1/M2 Control)1
  • Quick Test Mode (NSC Non-Self Cleaning Control)1. Press and hold Cancel and Broil pads for 3 to 5 seconds within 5 minutes of power-up. 2. Release…
  • Sabbath ModeHold CLOCK pad for 3 seconds to activate Sabbath mode.
  • Sabbath Mode (H1/M1/M2 Control)["Hold CLOCK pad for 3 seconds to activate Sabbath mode."]
  • Service Mode (EOC III)1
  • Temperature Display Toggle (°F/°C)Press and hold Cancel and Bake pads for 3 seconds.
  • Temperature Display Toggle (F/C)Press and hold Cancel and Bake pads for 3 seconds.
  • Test Mode (UH Control)1

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag range models

75,000+ service documents · 20,000+ error codes · 100+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass