mypros+
Model reference

Maytag CE38600AAV

Range

4 documents13 error codes14 service modes

Available documentation

Tech Sheet

  • Electric Freestanding Range — Technical Information8 pg
    Covers this model
  • Electric Freestanding Range — Technical Information8 pg
    Covers this model

Service Manual

  • Service Manual - Freestanding Electric Range54 pg
    Covers this model
  • Freestanding Electric Range Service Manual54 pg
    Covers this model
MyPros+ Max

Diagnose your Maytag CE38600AAV.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (13)

CodeMeaning
1c1cShorted key detected; keypress disables audible for affected key depression.1c2cKeyboard tail disconnected; keyboard loop reading improper value.1c31Cancel key circuit problem; cancel key returning improper value.1c6cEEPROM error; no response from EEPROM after 3 tries.1c7cControl not calibrated; calibration value out of range.1c8cCooking program error; CRC invalid when cook or clean is programmed.1d11Runaway oven temperature (650°F) with door unlocked; sensor resistance greater…1d21Runaway oven temperature (950°F) with door locked; sensor resistance greater…3d11Oven temperature sensor open; sensor resistance reading infinite ohms during…3d21Oven temperature sensor shorted; sensor resistance reading 0 ohms during cook…4d11Door switch not closed when door is locked; disables Clean and Lockout…4d51Door switch not open or closed (invalid state); turns off oven light and…9d11Latch will not lock; lock switch not closed when it should be locked.

Service modes (14)

  • 24 Hour Clock TogglePress and hold Cancel and Delay pads for 3 to 5 seconds. Press More + or Less
  • Child Lock OutPress and hold Cancel and Cook & Hold pads for 3 to 5 seconds until beep sounds.
  • Clock Display TogglePress and hold Cancel and Clock pads for 3 to 5 seconds.
  • Clock Display Toggle (On/Off)["Press and hold Cancel and Clock pads for 3 to 5 seconds."]
  • Diagnostic Code Display1. Within 60 seconds of powering up the unit, press and hold the More + pad. 2. Cycle through…
  • Diagnostic Code Display Mode["Must be started within 60 seconds of powering up the control.","Press and hold More + pad within…
  • Factory Default ResetPress and hold Cancel and Keep Warm pads for 3 to 5 seconds until beep sounds.
  • Oven Temperature Adjustment1. Press Bake pad. 2. Enter 550 on the digit pad. 3. Immediately press and hold Bake pad for 3 to 5…
  • Quick Test1
  • Quick Test Mode["Must be entered within the first 5 minutes after power up.","Press and hold Cancel and Broil pads…
  • Sabbath Mode1
  • Temperature Display (°F/°C toggle)["Press and hold Cancel and Bake pads for 3 to 5 seconds.","Press More + or Less
  • Temperature Display (F/C toggle)Press and hold Cancel and Bake pads for 3 to 5 seconds. Press More + or Less
  • Temperature Display Toggle (°F/°C)["Press and hold Cancel and Bake pads for 3 to 5 seconds.","Press More + or Less

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag range models

75,000+ service documents · 20,000+ error codes · 100+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass