Model reference
Maytag CER3525ACB
Range
5 documents13 error codes20 service modes
Available documentation
Tech Sheet
- Tech Sheet - 16023539F (FR)10 pg
- Electric Freestanding Range — Technical Information8 pg
Service Manual
- Service Manual - Freestanding Electric Range54 pg
- Freestanding Electric Range Service Manual54 pg
- Failure Codes And Wiring Diagrams For Maytag Heritage Gas & Electric Ranges124 pg
MyPros+ Max
Diagnose your Maytag CER3525ACB.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (13)
CodeMeaning
1c1cShorted key detected; keypress disables audible for affected key depression.1c2cKeyboard tail disconnected; keyboard loop reading improper value.1c31Cancel key circuit problem; cancel key returning improper value.1c6cEEPROM error; no response from EEPROM after 3 tries.1c7cControl not calibrated; calibration value out of range.1c8cCooking program error; CRC invalid when cook or clean is programmed.1d11Runaway oven temperature (650°F) with door unlocked; sensor resistance greater…1d21Runaway oven temperature (950°F) with door locked; sensor resistance greater…3d11Oven temperature sensor open; sensor resistance reading infinite ohms during…3d21Oven temperature sensor shorted; sensor resistance reading 0 ohms during cook…4d11Door switch not closed when door is locked; disables Clean and Lockout…4d51Door switch not open or closed (invalid state); turns off oven light and…9d11Latch will not lock; lock switch not closed when it should be locked.Service modes (20)
- 12-Hour Auto Shutoff DisableThe control automatically cancels any cooking and disables all relay drivers 12 hours after the…
- 12/24 Hour Clock TogglePress and hold Cancel and Delay buttons simultaneously for 3-5 seconds
- 24 Hour Clock TogglePress and hold Cancel and Delay pads for 3 to 5 seconds. Press More + or Less
- Child Lock OutPress and hold Cancel and Cook & Hold pads for 3 to 5 seconds until beep sounds.
- Child Safety LockPress and hold Cancel and Cook & Hold buttons simultaneously for 3-5 seconds until a beep is heard.
- Clock Display TogglePress and hold Cancel and Clock pads for 3 to 5 seconds.
- Clock Display Toggle (On/Off)["Press and hold Cancel and Clock pads for 3 to 5 seconds."]
- Diagnostic Code Display1. Within 60 seconds of powering up the unit, press and hold the More + pad. 2. Cycle through…
- Diagnostic Code Display Mode["Must be started within 60 seconds of powering up the control.","Press and hold More + pad within…
- Factory Default ResetPress and hold Cancel and Keep Warm pads for 3 to 5 seconds until beep sounds.
- Oven Temperature Adjustment1. Press Bake pad. 2. Enter 550 on the digit pad. 3. Immediately press and hold Bake pad for 3 to 5…
- Oven Temperature Calibration Adjustment1. Press the Bake button. 2. Enter 550 on the numeric keypad. 3. Immediately press and hold the…
- Quick Test1
- Quick Test Mode["Must be entered within the first 5 minutes after power up.","Press and hold Cancel and Broil pads…
- Quick Test Mode (Factory Verification Mode)1. Must enter within first 5 minutes after power-on. 2. Press and hold Cancel and Broil buttons…
- Sabbath Mode1
- Temperature Display (°C/°F Toggle)Press and hold Cancel and Bake buttons simultaneously for 3-5 seconds
- Temperature Display (°F/°C toggle)["Press and hold Cancel and Bake pads for 3 to 5 seconds.","Press More + or Less
- Temperature Display (F/C toggle)Press and hold Cancel and Bake pads for 3 to 5 seconds. Press More + or Less
- Temperature Display Toggle (°F/°C)["Press and hold Cancel and Bake pads for 3 to 5 seconds.","Press More + or Less
Full entry steps, exit procedures, and test sequences are available in Max.
Related Maytag range models
75,000+ service documents · 20,000+ error codes · 100+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass