mypros+
Model reference

Maytag JDS9860BCP

Range

4 documents18 error codes4 service modes

Available documentation

Tech Sheet

  • Tech Sheet - 16026095F (FR)13 pg
    Covers this model
  • Technical Information—Dual Fuel Slide-In Range11 pg
    Covers this model

Service Flash

  • Service Pointer - 8178755 (Two Burner Cartridge)2 pg
    Covers this model

Other

  • 81787551 pg
    Covers this model
MyPros+ Max

Diagnose your Maytag JDS9860BCP.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (18)

CodeMeaning
F0-0No error.F1-1Oven temperature exceeded 650°F (343°C) in bake mode.F1-3Oven temperature exceeded 950°F (510°C) during a clean cycle.F1-5Cancel key is not responding.F1-7Membrane disconnected.F1-8Key (keypad) shorted in membrane switch.F1-9Internal control communication errors.F1-ALock/unlock switch status does not pass to the control.F1-COven door switch status does not pass to the control.F1-EControl not calibrated.F1-FJumper not removed from the circuit board.F1-HEEPROM error.F1-NIncorrect internal voltage of the slave micro.F3-1Oven temperature sensor open or shorted.F8Meat probe shorted.F9-1Oven door will not lock.F9-2Oven door will not unlock.F9-3Oven door status is both locked and unlocked.

Service modes (4)

  • Factory Default Options Change1
  • Quick Test (Quick Check Mode)1
  • Quick Test ModePress and hold Cancel and Broil pads simultaneously for 3 seconds at power-up, or within 5 minutes…
  • Setup Options (Default Configuration)Press Setup Options and the desired pad simultaneously (see options table)

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass