Skip to main contentGet Started
Error code reference
Maytag Range Error Code F0-0
No fault present (default from factory).
Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
What the F0-0 error code actually means
The F0-0 code simply means your Maytag range has no errors recorded and is in its default state. Think of it as the control board saying everything is clear. No repairs are needed when this is the only code showing.
Diagnostic procedure
The full F0-0 procedure
Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.
MyPros+ · DiagnosticsStep 1 preview
1
Confirm the fault
Power cycle the unit: switch off the breaker for 60 seconds, then restore power. If the code returns, the fault is persistent and the procedure below isolates the cause.
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock F0-0 procedure $9.95
Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.
Most common causes of F0-0
Ranked by how often they cause this code
- 1Diagnostic mode accessed intentionally or accidentally
- 2Factory default state on new or reset control board
- 3Control board memory cleared after a power cycle
- 4Accidental button combination triggering diagnostic display
Most DIYers save hundreds by diagnosing before ordering parts.
Get Started
$29/month · Cancel anytime · Or $9.95 3-day pass
Questions people ask about F0-0
What does F0-0 mean on a Maytag range?
F0-0 is the default status code stored in the control board from the factory. It indicates that no fault conditions have been detected or recorded. It is not an error and requires no repair action.
Is it safe to use my Maytag range when F0-0 is showing?
Yes, F0-0 poses no safety concern. The code means the range has a clean fault history and all monitored systems are operating without detected issues. You can continue using the range normally.
How much does it cost to repair a Maytag range showing F0-0?
There is no repair cost associated with F0-0 because it is not a fault code. If a technician visit is needed to confirm no other codes are present or to exit a diagnostic mode, a standard service call fee typically ranges from $75 to $150 depending on your region and the service provider.
How do I fix the F0-0 code on my Maytag range?
No fix is needed for F0-0 because it is not a fault condition. If the code appeared unexpectedly during normal use, press the Cancel button or turn off power to the range at the circuit breaker for 60 seconds, then restore power. The display should return to normal operation.
Will resetting the range clear the F0-0 code?
F0-0 does not need to be cleared because it is the default state, not an active fault. If you want to exit a diagnostic display mode, pressing Cancel or cycling power at the breaker will return the range to its normal standby display.
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass