mypros+
Model reference

Maytag JGR8875QDB

Range

13 documents27 error codes25 service modes

Available documentation

Tech Sheet

  • Tech Sheet - 1602250310 pg
    Covers this model

Service Manual

  • Gas Freestanding Range Base Manual42 pg
    Covers this model
  • Maytag Freestanding Range Repair Service Manual42 pg
    Covers this model
  • Service Manual - Gas Freestanding Range42 pg
    Covers this model

Bulletin

  • Technical Bulletin - TDC-0075-B-French Gas Valve Regulator1 pg
    Covers this model
  • Technical Bulletin - TDC-0075-B Gas Valve Regulator1 pg
    Covers this model
  • Technical Bulletin - Surface Valve Replacement Availability1 pg
    Covers this model
  • Technical Bulletin - LP Conversion Kits1 pg
    Covers this model
  • Technical Bulletin - Door Glass Rattle1 pg
    Covers this model
  • Technical Bulletin - Gas Valve Regulator1 pg
    Covers this model
  • Technical Bulletin - TDC-0075-B Gas Valve Regulator1 pg
    Covers this model
  • Technical Bulletin1 pg
    Covers this model
  • Technical Bulletin - Automatic Oven Light Operation1 pg
    Covers this model
MyPros+ Max

Diagnose your Maytag JGR8875QDB.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (27)

CodeMeaning
1c1cShorted key detected on the control circuit board.1c2cKeyboard tail disconnected from the control board.1c31Cancel key circuit problem (cancel key improper value).1c32Cancel key circuit problem (cancel key improper value, second instance).1c6cEEPROM error1c7cControl not calibrated1c8cCooking program error1d11Runaway temperature (650°F) detected with door unlocked; sensor resistance >…1d12Runaway temperature (650°F) detected with door unlocked (second instance)…1d21Runaway temperature (950°F) detected with door locked; sensor resistance > 2787…1d22Runaway temperature (950°F) detected with door locked (second instance); sensor…3d11Oven temperature sensor open3d12Oven temperature sensor open (second instance)3d21Oven temperature sensor shorted3d22Oven temperature sensor shorted (second instance)4d11Door switch position failure4d12Door switch position failure (second instance)4d21No reverse airflow fan rotation (no or low RPM detected).4d31Reverse airflow fan is on when it should be off.4d51Door switch circuit failure4d52Door switch circuit failure (second instance)9d11Latch will not lock9d12Latch will not lock (second instance)9d21Latch will not unlock9d22Latch will not unlock (second instance)9d31Latch state unknown9d32Latch state unknown

Service modes (25)

  • 24 Hour Clock TogglePress and hold Cancel and Favorite pads for 3 seconds.
  • 24 Hour Clock Toggle (H1/M2 Control)Press and hold Cancel and Favorite pads for 3 seconds.
  • 24 Hour Clock Toggle (M1 Control)Press and hold Cancel and Delay pads for 3 seconds.
  • Child Lock OutPress and hold Cancel and Cook & Hold pads for 3 seconds
  • Child Lock Out (H1/M1/M2 Control)["Press and hold Cancel and Cook & Hold pads for 3 seconds.","'OFF' will display where temperature…
  • Child LockoutPress and hold Cancel and Cook & Hold pads for 3 seconds
  • Clock Display TogglePress and hold Cancel and Clock pads for 3 seconds.
  • Clock Display Toggle (On/Off)Press and hold Cancel and Clock pads for 3 seconds.
  • Diagnostic Code Display ModePress and hold the AUTOSET pad for 3 seconds at power-up
  • Diagnostic Code Display Mode (H1 Control)Press and hold the AUTOSET pad for 3 seconds at power-up
  • Diagnostic Code Display Mode (M1 Control)Press and hold Up Arrow pad while powering up the unit
  • Diagnostic Code Display Mode (M1/M2 Control)Press and hold the Up Arrow pad and power up the unit
  • Diagnostic Code Display Mode (M2 Control)Press and hold Up Arrow pad while powering up the unit
  • Factory Default ResetPress and hold Cancel and Keep Warm pads for 3 seconds.
  • Oven Temperature AdjustmentPress BAKE pad
  • Oven Temperature Adjustment (H1 Control)["Press BAKE pad.","Enter 550 on the digit-pad.","Immediately press and hold BAKE pad for 3…
  • Oven Temperature Adjustment (H1/M1/M2 Control)1
  • Oven Temperature Adjustment (H1/M1/M2 Controls)1
  • Quick Test ModePress and hold CANCEL and BROIL pads simultaneously for 3 seconds
  • Quick Test Mode (H1 Control)1
  • Quick Test Mode (M1/M2 Control)1
  • Sabbath ModeHold CLOCK pad for 3 seconds to activate Sabbath mode.
  • Sabbath Mode (H1/M1/M2 Control)["Hold CLOCK pad for 3 seconds to activate Sabbath mode."]
  • Temperature Display Toggle (°F/°C)Press and hold Cancel and Bake pads for 3 seconds.
  • Temperature Display Toggle (F/C)Press and hold Cancel and Bake pads for 3 seconds.

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass