Model reference

Maytag MER4351AAB

Name: Maytag MER4351AAB
Brand: Maytag

Range

6 documents15 error codes17 service modes

Available documentation

Tech Sheet

Tech Sheet - 160264657 pg
Covers this model
Electric Freestanding Range — Technical Information8 pg
Covers this model
Electric Freestanding Range — Technical Information7 pg
Covers this model

Service Manual

Service Manual - Freestanding Electric Range54 pg
Covers this model
Freestanding Electric Range Service Manual54 pg
Covers this model

Bulletin

Service Pointer - 8178740 (Oven Starts Before Desired Temperature is Selected)2 pg
Covers this model

MyPros+ Max

Diagnose your Maytag MER4351AAB.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·Maytag Range

1c1c on my Maytag MER4351AAB

M+

Shorted key – keypress detected

From Tech Sheet W14467021, p.33:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure control board supply voltage at test points. Expected: 12 VDC and 5 VDC.

3.Inspect all connectors on the main control for corrosion or backed-out pins.

Part WPW10804018

Electronic control board

Error codes (15)

CodeMeaning

1c1cShorted key 1c2cKeyboard tail disconnected; keyboard loop reading improper value.1c31Cancel key circuit problem 1c4cMicro communication failure 1c5cVcc or ground fault 1c6cEEPROM error 1c7cControl not calibrated 1c8cCooking program error 1d11Runaway oven temperature (650°F)1d21Runaway oven temperature (950°F) with door locked; sensor resistance greater…3d11Sensor open 3d21Sensor shorted 4d11Door switch not closed when door is locked.4d51Door switch not open or closed; reading invalid state 9d11Latch will not lock; lock switch not closed when it should be locked.

Service modes (17)

24 Hour Clock Toggle["Press and hold Cancel and Delay pads for 3 to 5 seconds.","Press More + or Less
Child Lock Out["Press and hold Cancel and Cook & Hold pads for 3 to 5 seconds until beep sounds."]
Clock Display Toggle["Press and hold Cancel and Clock pads for 3 to 5 seconds."]
Clock Display Toggle (On/Off)["Press and hold Cancel and Clock pads for 3 to 5 seconds."]
Diagnostic Code DisplayPress and hold More + pad for 3 to 5 seconds within 60 seconds of powering up the unit. Cycle…
Diagnostic Code Display Mode["Must be started within 60 seconds of powering up the control.","Press and hold More + pad within…
Factory Default Reset["Press and hold Cancel and Keep Warm pads for 3 to 5 seconds until beep sounds."]
Keypad LockoutPress and hold Cancel and Timer pads for 3 to 5 seconds. Press More + or Less
One-Watt Standby ModePress and hold Cancel and Less
Oven Temperature Adjustment1. Press Bake pad. 2. Enter 550 on the digit-pad. 3. Immediately press and hold Bake pad for 3 to 5…
Quick Test1. Within 5 minutes of power-up, press and hold Cancel and Broil pads simultaneously for 3 to 5…
Quick Test Mode["Must be entered within the first 5 minutes after power up.","Press and hold Cancel and Broil pads…
Sabbath Mode1
Temperature Display (°F/°C toggle)["Press and hold Cancel and Bake pads for 3 to 5 seconds.","Press More + or Less
Temperature Display (°F/°C)Press and hold Cancel and Bake pads for 3 to 5 seconds. Press More + or Less
Temperature Display (F/C toggle)Press and hold Cancel and Bake pads for 3 to 5 seconds. Press More + or Less
Temperature Display Toggle (°F/°C)["Press and hold Cancel and Bake pads for 3 to 5 seconds.","Press More + or Less

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass