Model reference
Maytag MER5555RC
Range
4 documents15 error codes10 service modes
Available documentation
Tech Sheet
- Electric Freestanding Range—Technical Information10 pg
Service Manual
- Failure Codes And Wiring Diagrams For Maytag Heritage Gas & Electric Ranges124 pg
Service Flash
- Technical Bulletin - TDC-0096-B Oven Door Handles Breaking_TDC-0096-B2 pg
Other
- TDC 0096 B2 pg
MyPros+ Max
Diagnose your Maytag MER5555RC.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (15)
CodeMeaning
1c1cShorted key detected on the control circuit board.1c2cKeyboard tail disconnected; keyboard loop reading improper value.1c31Cancel key circuit problem; cancel key returning improper value.1c6cEEPROM error; no response from EEPROM after 3 tries.1c7cControl not calibrated; calibration value out of range.1c8cCooking program error; CRC invalid.1d11Runaway oven temperature (650°F) detected while door is unlocked; sensor…1d21Runaway oven temperature (950°F) detected while door is locked; sensor…3d11Oven temperature sensor open; sensor resistance reads infinite ohms.3d21Oven temperature sensor shorted; sensor resistance reads 0 ohms.4d11Door switch position failure; door switch not closed when door is locked.4d51Door switch circuit failure; door switch not reading open or closed.9d11Door latch will not lock; lock switch not closed when it should be locked.9d21Door latch will not unlock; unlock switch not closed when it should be unlocked.9d31Latch state unknown; both lock and unlock switches reading closed…Service modes (10)
- 24-Hour Clock Toggle["Press and hold Cancel and Delay pads for 3 to 5 seconds."]
- Child Lock Out["Press and hold Cancel and Cook & Hold pads for 3 to 5 seconds.","'OFF' will display where the…
- Clock Display Toggle["Press and hold Cancel and Clock pads for 3 to 5 seconds."]
- Diagnostic Code Display (alternate method)["Press and hold Up Arrow pad and power up the unit.","Cycle through the codes using the number…
- Diagnostic Code Display Mode["Press and hold the AUTOSET pad for 3 to 5 seconds while powering up the unit.","Cycle through the…
- Factory Default Reset["Press and hold Cancel and Keep Warm pads for 3 to 5 seconds."]
- Oven Temperature Adjustment["Press BAKE pad.","Enter 550 on the digit-pad.","Immediately press and hold BAKE pad for 3 to 5…
- Quick Test Mode["Must be entered within the first 5 minutes after applying power.","Press and hold CANCEL and…
- Sabbath Mode["Hold CLOCK pad for 3 to 5 seconds to activate Sabbath mode."]
- Temperature Display Toggle (F/C)["Press and hold Cancel and Bake pads for 3 to 5 seconds."]
Full entry steps, exit procedures, and test sequences are available in Max.
Related Maytag range models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass