Model reference

Maytag MER5751AAW

Name: Maytag MER5751AAW
Brand: Maytag

Range

7 documents36 error codes26 service modes

Available documentation

Tech Sheet

Electric Freestanding Range — Technical Information8 pg
Covers this model

Service Manual

Service Manual - Freestanding Electric Range54 pg
Covers this model
Freestanding Electric Range Service Manual54 pg
Covers this model
Failure Codes and Wiring Diagrams for Maytag Heritage Gas & Electric Ranges124 pg
Covers this model
Failure Codes and Wiring Diagrams for Maytag Heritage Gas & Electric Ranges124 pg
Covers this model

Service Flash

Technical Bulletin - TDC-0096-B Oven Door Handles Breaking_TDC-0096-B2 pg
Covers this model

Other

TDC 0096 B2 pg
Covers this model

MyPros+ Max

Diagnose your Maytag MER5751AAW.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·Maytag Range

1c1c on my Maytag MER5751AAW

M+

Shorted key detected on the control

From Tech Sheet W11446715, p.47:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure control board supply voltage at test points. Expected: 12 VDC and 5 VDC.

3.Inspect all connectors on the main control for corrosion or backed-out pins.

Part WPW10804018

Electronic control board

Error codes (36)

CodeMeaning

1c1cShorted key detected on the control circuit board keyboard.1c2cKeyboard tail disconnected or keyboard loop has improper value.1c31Cancel key circuit problem (cancel key improper value) on upper/single oven…1c32Cancel key circuit problem (cancel key improper value) on lower oven cavity.1c4cPower micro communication failure (CRC invalid).1c6cEEPROM error 1c7cControl not calibrated 1c81Cook profile corrupted in EEPROM for upper/single oven cavity (CRC invalid).1c82Cook profile corrupted in EEPROM for lower oven cavity (CRC invalid).1c8cCooking program error; CRC invalid.1d11Runaway temperature (650°F) detected with door unlocked on upper/single oven…1d12Runaway temperature (650°F) detected with door unlocked on lower oven cavity.1d21Runaway temperature (950°F) detected with door locked on upper/single oven…1d22Runaway temperature (950°F) detected with door locked on lower oven cavity.3d11Temperature sensor failure (open) on upper/single oven cavity 3d12Temperature sensor failure (open) on lower oven cavity 3d21Temperature sensor failure (short) on upper/single oven cavity 3d22Temperature sensor failure (short) on lower oven cavity 3d41Meat probe shorted 3d51Meat probe not calibrated 4d11Door switch position failure 4d12Door switch position failure 4d21No Reverse Airflow Fan rotation (no/low RPM) on upper/single oven cavity.4d22No Reverse Airflow Fan rotation (no/low RPM) on lower oven cavity.4d31Reverse Airflow Fan state error 4d32Reverse Airflow Fan state error 4d41High Reverse Airflow Fan rotation (high RPM) on upper/single oven cavity.4d42High Reverse Airflow Fan rotation (high RPM) on lower oven cavity.4d51Door switch circuit failure 4d52Door switch circuit failure

View all 36 error codes

9d11Door latch will not lock on upper/single oven cavity 9d12Door latch will not lock on lower oven cavity 9d21Door latch will not unlock on upper/single oven cavity 9d22Door latch will not unlock on lower oven cavity 9d31Door latch both locked and unlocked simultaneously on upper/single oven 9d32Door latch both locked and unlocked simultaneously on lower oven

Service modes (26)

24 Hour Clock Toggle["Press and hold Cancel and Delay pads for 3 to 5 seconds.","Press More + or Less
Child Lock Out["Press and hold Cancel and Cook & Hold pads for 3 to 5 seconds until beep sounds."]
Clock Display Toggle (On/Off)["Press and hold Cancel and Clock pads for 3 to 5 seconds."]
Diagnostic Code Display["Must be started within 60 seconds of powering up the control.","Press and hold More + pad within…
Diagnostic Code Display Mode["Must be started within 60 seconds of powering up the control.","Press and hold More + pad within…
Diagnostic Code Display Mode (H1 Controls)Press and hold AUTOSET pad for 3 seconds at power-up.
Diagnostic Code Display Mode (H3 Controls)Press and hold Upper Cancel and Timer for 3 to 5 seconds within 5 minutes of power up.
Diagnostic Code Display Mode (NSC Controls)Press and hold the More + pad for 3 to 5 seconds when powering up the unit (within 60 seconds of…
Factory Default Reset["Press and hold Cancel and Keep Warm pads for 3 to 5 seconds until beep sounds."]
Faults Access (EOC III Controls)1
One-Watt Standby Mode (NSC Controls)Press and hold Cancel and Less
Oven Temperature Adjustment["Press Bake pad.","Enter 550 on the digit-pad.","Immediately press and hold Bake pad for 3 to 5…
Quick Test1
Quick Test Mode["Must be entered within the first 5 minutes after power up.","Press and hold Cancel and Broil pads…
Quick Test Mode (EOC III Controls)1
Quick Test Mode (H1 Controls - Convection Model)1
Quick Test Mode (H1 Controls - Non-Convection Model)1
Quick Test Mode (H2/H2.5 Controls)1
Quick Test Mode (H3 Controls)1
Quick Test Mode (M1/M2 Controls)1
Quick Test Mode (NSC Non-Self Clean Controls)1
Sabbath Mode["Initiate desired bake function before entering Sabbath mode.","Hold Clock button for 3 to 5…
Service Mode (EOC III Controls)1
Temperature Display (°F/°C toggle)["Press and hold Cancel and Bake pads for 3 to 5 seconds.","Press More + or Less
Temperature Display Toggle (°F/°C)Press and hold Cancel and Bake pads for 3 to 5 seconds. Press More + or Less
Test Mode (UH Controls)1

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass