mypros+
Model reference

Maytag MER5754QAW

Range

11 documents36 error codes47 service modes

Available documentation

Tech Sheet

  • Tech Sheet - 160256469 pg
    Covers this model
  • Electric Freestanding Range⎯Technical Information9 pg
    Covers this model

Service Manual

  • Service Manual - 1602248736 pg
    Covers this model
  • Electric Freestanding Range Base Manual36 pg
    Covers this model
  • Service Manual - Electric Freestanding Range36 pg
    Covers this model
  • Failure Codes and Wiring Diagrams for Maytag Heritage Gas & Electric Ranges124 pg
    Covers this model
  • Failure Codes And Wiring Diagrams For Maytag Heritage Gas & Electric Ranges124 pg
    Covers this model

Bulletin

  • Technical Bulletin - Wiring replacement dual infinite switch1 pg
    Covers this model
  • Technical Bulletin - TDC-0090-B Wiring replacement dual infinite switch1 pg
    Covers this model
  • Technical Bulletin - Door Glass Rattle1 pg
    Covers this model
  • Technical Bulletin - Automatic Oven Light Operation1 pg
    Covers this model
MyPros+ Max

Diagnose your Maytag MER5754QAW.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (36)

CodeMeaning
1c1cShorted key1c2cKeyboard tail disconnected1c31Cancel key circuit problem1c32Cancel key circuit problem (lower oven cavity).1c4cPower micro communication failure (CRC invalid).1c6cEEPROM error1c7cControl not calibrated1c81Cook profile corrupted in EEPROM for upper/single oven cavity (CRC invalid).1c82Cook profile corrupted in EEPROM for lower oven cavity (CRC invalid).1c8cCooking program error1d11Runaway temperature (650°F) with door unlocked1d12Runaway oven temperature (650°F) detected with door unlocked (lower cavity).1d21Runaway temperature (950°F) with door locked1d22Runaway oven temperature (950°F) detected with door locked (lower cavity).3d11Sensor open3d12Oven temperature sensor open circuit (lower cavity).3d21Sensor shorted3d22Oven temperature sensor shorted (lower cavity).3d41Meat probe shorted3d51Meat probe not calibrated4d11Door switch position failure4d12Door switch position failure4d21No reverse airflow fan rotation (no or low RPM) during clean or cook.4d22No Reverse Airflow Fan rotation (no/low RPM) on lower oven cavity.4d31Reverse airflow fan running when it should be off.4d32Reverse Airflow Fan state error4d41High Reverse Airflow Fan rotation (high RPM) on upper/single oven cavity.4d42High Reverse Airflow Fan rotation (high RPM) on lower oven cavity.4d51Door switch circuit failure4d52Door switch circuit failure
View all 36 error codes
9d11Latch will not lock9d12Door latch will not lock9d21Latch will not unlock9d22Door latch will not unlock9d31Latch state unknown9d32Door latch state unknown

Service modes (47)

  • 24 Hour Clock Toggle["Press and hold Cancel and Delay pads for 3 seconds."]
  • 24 Hour Clock Toggle (H1 Control)["Press and hold Cancel and Favorites pads for 3 seconds."]
  • 24 Hour Clock Toggle (M1 Control)["Press and hold Cancel and Delay pads for 3 seconds."]
  • 24 Hour Clock Toggle (M2 Control)["Press and hold Cancel and Favorite pads for 3 seconds."]
  • Child Lock Out["Press and hold Cancel and Cook & Hold pads for 3 seconds.","'OFF' will display where the…
  • Child Lock Out (H1 Control)Press and hold Cancel and Cook & Hold pads for 3 seconds
  • Child Lockout["Press and hold Cancel and Cook & Hold pads for 3 seconds.","'OFF' displays where temperature…
  • Clock Display Toggle["Press and hold Cancel and Clock pads for 3 seconds."]
  • Clock Display Toggle (H1/M1/M2)Press and hold Cancel and Clock pads for 3 seconds.
  • Clock Display Toggle (On/Off)["Press and hold Cancel and Clock pads for 3 seconds."]
  • Diagnostic Code Display["Press and hold Up Arrow pad.","While holding Up Arrow, power up the unit.","Cycle through the…
  • Diagnostic Code Display (H1 Control)Press and hold AUTOSET pad for 3 seconds at power-up
  • Diagnostic Code Display (M1/M2 Control)Press and hold Up Arrow pad and power up the unit simultaneously
  • Diagnostic Code Display Mode (H1 Control)["Press and hold the AUTOSET pad for 3 seconds at power-up (during Power On Reset).","Cycle through…
  • Diagnostic Code Display Mode (H1 Controls)Press and hold AUTOSET pad for 3 seconds at power-up.
  • Diagnostic Code Display Mode (H3 Controls)Press and hold Upper Cancel and Timer for 3 to 5 seconds within 5 minutes of power up.
  • Diagnostic Code Display Mode (M1 Control)Press and hold Up Arrow pad and power up the unit
  • Diagnostic Code Display Mode (M1/M2 Control)["Press and hold the Up Arrow pad while powering up the unit.","Cycle through stored codes using…
  • Diagnostic Code Display Mode (M2 Control)Press and hold Up Arrow pad and power up the unit
  • Diagnostic Code Display Mode (NSC Controls)Press and hold the More + pad for 3 to 5 seconds when powering up the unit (within 60 seconds of…
  • Factory Default Reset["Press and hold Cancel and Keep Warm pads for 3 seconds."]
  • Factory Default Reset (H1/M1/M2)Press and hold Cancel and Keep Warm pads for 3 seconds.
  • Faults Access (EOC III Controls)1
  • One-Watt Standby Mode (NSC Controls)Press and hold Cancel and Less
  • Oven Temperature Adjustment["Press BAKE pad.","Enter 550 on the digit-pad.","Immediately press and hold BAKE pad for 3…
  • Oven Temperature Adjustment (H1 Control)["Press BAKE pad.","Enter 550 on the digit-pad.","Immediately press and hold BAKE pad for 3…
  • Oven Temperature Adjustment (M1/M2 Control)["Press BAKE pad.","Enter 550 using slew pads.","Immediately press and hold BAKE pad for 3…
  • Quick Test["Must be entered within the first 5 minutes after power up.","Press and hold CANCEL and BROIL pads…
  • Quick Test (H1 Control)1
  • Quick Test (M1 and M2 Controls)1
  • Quick Test (M1/M2 Control)1
  • Quick Test Mode (EOC III Controls)1
  • Quick Test Mode (H1 Control)["Press and hold CANCEL and BROIL pads simultaneously for 3 seconds.","Once the control has entered…
  • Quick Test Mode (H1 Controls - Convection Model)1
  • Quick Test Mode (H1 Controls - Non-Convection Model)1
  • Quick Test Mode (H2/H2.5 Controls)1
  • Quick Test Mode (H3 Controls)1
  • Quick Test Mode (M1/M2 Control)["Press and hold CANCEL and BROIL pads simultaneously for 3 seconds.","Once the control has entered…
  • Quick Test Mode (M1/M2 Controls)1
  • Quick Test Mode (NSC Non-Self Clean Controls)1
  • Sabbath Mode["Hold CLOCK button for 3 seconds to activate Sabbath mode.","'SAb' will be displayed and flash for…
  • Sabbath Mode (H1/M1/M2)Hold CLOCK pad for 3 seconds to activate
  • Service Mode (EOC III Controls)1
  • Temperature Display Toggle (°F/°C)["Press and hold Cancel and Bake pads for 3 seconds."]
  • Temperature Display Toggle (F/C)["Press and hold Cancel and Bake pads for 3 seconds."]
  • Temperature Display Toggle (H1/M1/M2)Press and hold Cancel and Bake pads for 3 seconds.
  • Test Mode (UH Controls)1

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass