Model reference
Maytag MER5765RAB1
Range
6 documents18 error codes13 service modes
Available documentation
Tech Sheet
- Electric Freestanding Range—Technical Information17 pg
- Electric Freestanding Range—Technical Information13 pg
- Electric Freestanding Range⎯Technical Information11 pg
Bulletin
- Technical Bulletin - TDC-0096-B-French Oven Door Handles Breaking2 pg
Service Flash
- Technical Bulletin - TDC-0096-B Oven Door Handles Breaking_TDC-0096-B2 pg
Other
- TDC 0096 B2 pg
MyPros+ Max
Diagnose your Maytag MER5765RAB1.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (18)
CodeMeaning
1c1cShorted key detected1c31Cancel key circuit problem1c4cMicro communication failure1c5cVcc or ground fault1c6cEEPROM error1c7cControl not calibrated1c8cCooking program error1d11Runaway oven temperature (650°F) detected with door unlocked1d21Runaway oven temperature (950°F) detected with door locked3d11Temperature sensor open3d21Temperature sensor shorted4d11Door position switch not closed when door is locked during clean cycle.4d51Door switch circuit failure9d11Door latch will not lock9d21Door latch will not unlock9d31Unlock state unknown9d41Unlock state unknown9d51Lock switch not reading locked or unlockedService modes (13)
- 24-Hour Clock TogglePress and hold CANCEL and DELAY pads for 3 to 5 seconds
- Child LockoutPress and hold CANCEL and COOK & HOLD pads for 3 to 5 seconds until beep sounds.
- Clock Display TogglePress and hold CANCEL and CLOCK pads for 3 to 5 seconds.
- Diagnostic Code DisplayWithin 30 seconds of powering up the unit, press and hold the [More+] pad
- Diagnostic Code Display Mode["Apply power to the control.","Within 30 seconds of powering up the unit, press and hold the MORE+…
- Factory Default ResetPress and hold CANCEL and KEEP WARM pads for 3 to 5 seconds.
- Oven Temperature Adjustment1
- Quick Test1. Within 5 minutes of power-up, press and hold Cancel and Broil pads simultaneously for 3 to 5…
- Quick Test Mode["Must be entered within the first 5 minutes after power-up.","Press and hold Cancel and Broil pads…
- Sabbath ModeHold CLOCK pad for 3 to 5 seconds to activate Sabbath mode
- Temperature Display (°F/°C toggle)["Press and hold CANCEL and BAKE pads for 3 to 5 seconds.","Press MORE+ or LESS- pads to change…
- Temperature Display Toggle (°F/°C)Press and hold CANCEL and BAKE pads for 3 to 5 seconds
- Temperature Display Toggle (F/C)Press and hold CANCEL and BAKE pads for 3 to 5 seconds
Full entry steps, exit procedures, and test sequences are available in Max.
Related Maytag range models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass