Model reference

Maytag MER5765RAS

Name: Maytag MER5765RAS
Brand: Maytag

Range

11 documents31 error codes27 service modes

Available documentation

Tech Sheet

Tech Sheet - 1602724717 pg
Covers this model
Electric Freestanding Range—Technical Information13 pg
Covers this model
Electric Freestanding Range—Technical Information17 pg
Covers this model
Electric Freestanding Range—Technical Information13 pg
Covers this model
Electric Freestanding Range⎯Technical Information11 pg
Covers this model

Service Manual

Electric Freestanding Range Base Manual36 pg
Covers this model
Service Manual - Electric Freestanding Range36 pg
Covers this model
Failure Codes And Wiring Diagrams For Maytag Heritage Gas & Electric Ranges124 pg
Covers this model

Service Flash

Technical Bulletin - TDC-0096-B Oven Door Handles Breaking_TDC-0096-B2 pg
Covers this model

Other

1602688513 pg
Covers this model
TDC 0096 B2 pg
Covers this model

MyPros+ Max

Diagnose your Maytag MER5765RAS.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·Maytag Range

1c1c on my Maytag MER5765RAS

M+

Shorted key detected — keypress is

From Tech Sheet W10387697, p.29:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure control board supply voltage at test points. Expected: 12 VDC and 5 VDC.

3.Inspect all connectors on the main control for corrosion or backed-out pins.

Part WPW10804018

Electronic control board

Error codes (31)

CodeMeaning

1c1cShorted key detected 1c2cKeyboard tail disconnected from control board.1c31Cancel key circuit problem 1c32Cancel key circuit problem (lower oven cavity).1c4cMicro communication failure 1c5cVcc or ground fault 1c6cEEPROM error 1c7cControl not calibrated 1c8cCooking program error 1d11Runaway oven temperature (650°F) detected with door unlocked 1d12Runaway oven temperature (650°F) detected with door unlocked (lower cavity).1d21Runaway oven temperature (950°F) detected with door locked 1d22Runaway oven temperature (950°F) detected with door locked (lower cavity).3d11Temperature sensor open 3d12Oven temperature sensor open circuit (lower cavity).3d21Temperature sensor shorted 3d22Oven temperature sensor shorted (lower cavity).4d11Door position switch not closed when door is locked during clean cycle.4d12Door switch position failure 4d21No reverse airflow fan rotation (no or low RPM) during clean or cook.4d31Reverse airflow fan running when it should be off.4d51Door switch circuit failure 4d52Door switch circuit failure 9d11Door latch will not lock 9d12Door latch will not lock 9d21Door latch will not unlock 9d22Door latch will not unlock 9d31Unlock state unknown 9d32Door latch state unknown 9d41Unlock state unknown

View all 31 error codes

9d51Lock switch not reading locked or unlocked

Service modes (27)

24 Hour Clock Toggle (H1 Control)["Press and hold Cancel and Favorites pads for 3 seconds."]
24 Hour Clock Toggle (M1 Control)["Press and hold Cancel and Delay pads for 3 seconds."]
24 Hour Clock Toggle (M2 Control)["Press and hold Cancel and Favorite pads for 3 seconds."]
24-Hour Clock TogglePress and hold CANCEL and DELAY pads for 3 to 5 seconds
Child LockoutPress and hold CANCEL and COOK & HOLD pads for 3 to 5 seconds until beep sounds.
Clock Display TogglePress and hold CANCEL and CLOCK pads for 3 to 5 seconds.
Clock Display Toggle (On/Off)["Press and hold Cancel and Clock pads for 3 seconds."]
Diagnostic Code DisplayWithin 30 seconds of powering up the unit, press and hold the [More+] pad
Diagnostic Code Display (H1 Control)Press and hold AUTOSET pad for 3 seconds at power-up
Diagnostic Code Display (M1/M2 Control)Press and hold Up Arrow pad and power up the unit simultaneously
Diagnostic Code Display Mode["Apply power to the control.","Within 30 seconds of powering up the unit, press and hold the MORE+…
Diagnostic Code Display Mode (H1 Control)["Press and hold the AUTOSET pad for 3 seconds at power-up (during Power On Reset).","Cycle through…
Diagnostic Code Display Mode (M1/M2 Control)["Press and hold the Up Arrow pad while powering up the unit.","Cycle through stored codes using…
Factory Default ResetPress and hold CANCEL and KEEP WARM pads for 3 to 5 seconds.
Oven Temperature Adjustment1
Oven Temperature Adjustment (H1 Control)["Press BAKE pad.","Enter 550 on the digit-pad.","Immediately press and hold BAKE pad for 3…
Oven Temperature Adjustment (M1/M2 Control)["Press BAKE pad.","Enter 550 using slew pads.","Immediately press and hold BAKE pad for 3…
Quick Test1. Within 5 minutes of power-up, press and hold Cancel and Broil pads simultaneously for 3 to 5…
Quick Test (H1 Control)1
Quick Test (M1/M2 Control)1
Quick Test Mode["Must be entered within the first 5 minutes after power-up.","Press and hold Cancel and Broil pads…
Quick Test Mode (H1 Control)["Press and hold CANCEL and BROIL pads simultaneously for 3 seconds.","Once the control has entered…
Quick Test Mode (M1/M2 Control)["Press and hold CANCEL and BROIL pads simultaneously for 3 seconds.","Once the control has entered…
Sabbath ModeHold CLOCK pad for 3 to 5 seconds to activate Sabbath mode
Temperature Display (°F/°C toggle)["Press and hold CANCEL and BAKE pads for 3 to 5 seconds.","Press MORE+ or LESS- pads to change…
Temperature Display Toggle (°F/°C)Press and hold CANCEL and BAKE pads for 3 to 5 seconds
Temperature Display Toggle (F/C)["Press and hold Cancel and Bake pads for 3 seconds."]

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass