Model reference
Maytag MER5775RAS1
Range
6 documents17 error codes12 service modes
Available documentation
Tech Sheet
- Electric Freestanding Range—Technical Information13 pg
- Electric Freestanding Range—Technical Information13 pg
- Electric Freestanding Range⎯Technical Information9 pg
Bulletin
- Technical Bulletin - TDC-0096-B-French Oven Door Handles Breaking2 pg
Service Flash
- Technical Bulletin - TDC-0096-B Oven Door Handles Breaking_TDC-0096-B2 pg
Other
- TDC 0096 B2 pg
MyPros+ Max
Diagnose your Maytag MER5775RAS1.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (17)
CodeMeaning
1c1cShorted key detected on control circuit board.1c2cKeyboard tail disconnected; keyboard loop returns improper value.1c31Cancel key circuit problem; cancel key returns improper value.1c6cEEPROM error; no response from EEPROM when accessing it.1c7cControl not calibrated; calibration value out of range.1c8cCooking program error; CRC invalid when cook or clean is programmed.1d11Runaway oven temperature (650°F) detected with door unlocked; sensor resistance…1d21Runaway oven temperature (950°F) detected with door locked; sensor resistance…3d11Oven temperature sensor open circuit; sensor resistance reads infinite ohms.3d21Oven temperature sensor shorted; sensor resistance reads 0 ohms.4d11Door switch position failure; door switch not closed when door is locked.4d51Door switch circuit failure; door switch not reading open or closed.5a6Sabbath Mode is active (displayed as "SaB"); not a fault code but stored in…5AbSabbath Mode is active (status indicator, not a fault code).9d11Door latch will not lock; lock switch not closed when latch should be locked.9d21Door latch will not unlock; unlock switch not closed when latch should be…9d31Latch state unknown; both lock and unlock switches read closed simultaneously.Service modes (12)
- 24-Hour Clock TogglePress and hold CANCEL and FAVORITE pads for 3 to 5 seconds.
- Child LockoutPress and hold CANCEL and COOK & HOLD pads for 3 to 5 seconds
- Clock Display TogglePress and hold CANCEL and CLOCK pads for 3 to 5 seconds.
- Diagnostic Code Display1
- Diagnostic Code Display Mode["Must be accessed within 30 seconds after applying power to the control.","Press and hold UP ARROW…
- Factory Default ResetPress and hold CANCEL and KEEP WARM pads for 3 to 5 seconds.
- Oven Temperature Adjustment1
- Quick Test1. Press and hold Cancel and Broil pads simultaneously for 3 to 5 seconds (must be within 5 minutes…
- Quick Test Mode["Must be entered within the first 5 minutes after power-up.","Press and hold Cancel and Broil pads…
- Sabbath Mode1
- Temperature Display Toggle (°F/°C)["Press and hold CANCEL and BAKE pads for 3 to 5 seconds."]
- Temperature Display Toggle (F/C)Press and hold CANCEL and BAKE pads for 3 to 5 seconds.
Full entry steps, exit procedures, and test sequences are available in Max.
Related Maytag range models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass