mypros+
Model reference

Maytag MER5875RCF

Range

10 documents28 error codes27 service modes

Available documentation

Tech Sheet

  • Tech Sheet - 1602723319 pg
    Covers this model
  • Tech Sheet - 1602688713 pg
    Covers this model
  • Electric Freestanding Range—Technical Information14 pg
    Covers this model
  • Electric Freestanding Range—Technical Information12 pg
    Covers this model
  • Electric Freestanding Range⎯Technical Information15 pg
    Covers this model
  • Electric Freestanding Range—Technical Information15 pg
    Covers this model

Service Manual

  • Electric Freestanding Range Base Manual36 pg
    Covers this model
  • Service Manual - Electric Freestanding Range36 pg
    Covers this model

Service Flash

  • Technical Bulletin - TDC-0096-B Oven Door Handles Breaking_TDC-0096-B2 pg
    Covers this model

Other

  • TDC 0096 B2 pg
    Covers this model
MyPros+ Max

Diagnose your Maytag MER5875RCF.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (28)

CodeMeaning
1c1cShorted key detected on the control circuit board.1c2cKeyboard tail disconnected; keyboard loop reading improper value.1c31Cancel key circuit problem; cancel key reading improper value.1c32Cancel key circuit problem; cancel key reading improper value.1c6cEEPROM error; no response from EEPROM after 3 tries.1c7cControl not calibrated; calibration value out of range.1c8cCooking program error; CRC invalid after 3 tries.1d11Runaway oven temperature (650°F) detected with door unlocked; sensor resistance…1d12Runaway oven temperature (650°F) detected with door unlocked; sensor resistance…1d21Runaway oven temperature (950°F) detected with door locked; sensor resistance >…1d22Runaway oven temperature (950°F) detected with door locked; sensor resistance >…3d11Temperature sensor open circuit detected; sensor resistance reading infinite…3d12Temperature sensor open circuit detected; sensor resistance reading infinite…3d21Temperature sensor shorted; sensor resistance reading 0 ohms.3d22Temperature sensor shorted; sensor resistance reading 0 ohms.4d11Door switch position failure; door switch not closed when door is locked.4d12Door switch position failure; door switch not closed when door is locked.4d21No reverse airflow fan rotation detected (no or low RPM).4d31Reverse airflow fan is on when it should be off.4d51Door switch circuit failure; door switch not reading open or closed.4d52Door switch circuit failure; door switch not reading open or closed.5a6Sabbath Mode active status indicator (not a fault code)9d11Door latch will not lock; lock switch not closed when it should be.9d12Door latch will not lock; lock switch not closed when it should be.9d21Door latch will not unlock; unlock switch not closed when it should be.9d22Door latch will not unlock; unlock switch not closed when it should be.9d31Latch state unknown; both locked and unlocked switches reading simultaneously.9d32Latch state unknown; both locked and unlocked switches reading simultaneously.

Service modes (27)

  • 24 Hour Clock Toggle (H1 Control)["Press and hold Cancel and Favorites pads for 3 seconds."]
  • 24 Hour Clock Toggle (M1 Control)["Press and hold Cancel and Delay pads for 3 seconds."]
  • 24 Hour Clock Toggle (M2 Control)["Press and hold Cancel and Favorite pads for 3 seconds."]
  • 24-Hour Clock TogglePress and hold CANCEL and FAVORITE pads for 3 to 5 seconds.
  • Child LockoutPress and hold CANCEL and COOK & HOLD pads for 3 to 5 seconds
  • Clock Display TogglePress and hold CANCEL and CLOCK pads for 3 to 5 seconds.
  • Clock Display Toggle (On/Off)["Press and hold Cancel and Clock pads for 3 seconds."]
  • Diagnostic Code DisplayPress and hold AUTOSET pad for 3 to 5 seconds while applying power to the range (during power-up…
  • Diagnostic Code Display (H1 Control)Press and hold AUTOSET pad for 3 seconds at power-up
  • Diagnostic Code Display (M1/M2 Control)Press and hold Up Arrow pad and power up the unit simultaneously
  • Diagnostic Code Display ModePress and hold AUTOSET pad for 3 to 5 seconds while applying power to the range (at power-up only)
  • Diagnostic Code Display Mode (H1 Control)["Press and hold the AUTOSET pad for 3 seconds at power-up (during Power On Reset).","Cycle through…
  • Diagnostic Code Display Mode (M1/M2 Control)["Press and hold the Up Arrow pad while powering up the unit.","Cycle through stored codes using…
  • Factory Default ResetPress and hold CANCEL and KEEP WARM pads for 3 to 5 seconds.
  • Oven Temperature Adjustment1
  • Oven Temperature Adjustment (H1 Control)["Press BAKE pad.","Enter 550 on the digit-pad.","Immediately press and hold BAKE pad for 3…
  • Oven Temperature Adjustment (M1/M2 Control)["Press BAKE pad.","Enter 550 using slew pads.","Immediately press and hold BAKE pad for 3…
  • Quick Test1
  • Quick Test (H1 Control)1
  • Quick Test (M1/M2 Control)1
  • Quick Test Mode1
  • Quick Test Mode (H1 Control)["Press and hold CANCEL and BROIL pads simultaneously for 3 seconds.","Once the control has entered…
  • Quick Test Mode (M1/M2 Control)["Press and hold CANCEL and BROIL pads simultaneously for 3 seconds.","Once the control has entered…
  • Sabbath ModeInitiate desired bake function first
  • Temperature Display TogglePress and hold CANCEL and BAKE pads for 3 to 5 seconds.
  • Temperature Display Toggle (°F/°C)Press and hold Cancel and Bake pads for 3 to 5 seconds.
  • Temperature Display Toggle (F/C)["Press and hold Cancel and Bake pads for 3 seconds."]

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass