Model reference
Maytag MES5775BC*
Range
4 documents27 error codes11 service modes
Available documentation
Tech Sheet
- Electric Slide-In Range⎯Technical Information16 pg
Bulletin
- Bulletin technique - TDC-0094-B-French Hot Surface Indicator Light Change1 pg
Service Flash
- Technical Bulletin - TDC-0096-B Oven Door Handles Breaking_TDC-0096-B2 pg
Other
- TDC 0096 B2 pg
MyPros+ Max
Diagnose your Maytag MES5775BC*.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (27)
CodeMeaning
1c1cShorted key detected on control panel.1c2cKeyboard tail disconnected from control board.1c31Cancel key circuit problem (cavity 1 / single cavity).1c32Cancel key circuit problem (cavity 2 / H1 models).1c6cEEPROM error1c7cControl not calibrated1c8cCooking program error1d11Runaway temperature (650°F) detected with door unlocked1d12Runaway temperature (650°F) detected with door unlocked (cavity 2 / H1 models).1d21Runaway temperature (950°F) detected with door locked1d22Runaway temperature (950°F) detected with door locked (cavity 2 / H1 models).3d11Temperature sensor open3d12Temperature sensor open (cavity 2 / H1 models).3d21Temperature sensor shorted3d22Temperature sensor shorted (cavity 2 / H1 models).4d11Door switch position failure4d12Door switch position failure (cavity 2 / H1 models).4d21No reverse airflow fan rotation detected (no or low RPM) during clean or cook…4d31Reverse airflow fan is on when it should be off.4d51Door switch circuit failure4d52Door switch circuit failure (cavity 2 / H1 models).9d11Door latch will not lock9d12Door latch will not lock (cavity 2 / H1 models).9d21Door latch will not unlock9d22Door latch will not unlock (cavity 2 / H1 models).9d31Latch state unknown9d32Latch state unknownService modes (11)
- 24 Hour Clock Toggle["Press and hold Cancel and Favorite pads for 3 to 5 seconds."]
- Child Lockout["Press and hold Cancel and Cook & Hold pads for 3 to 5 seconds.","'OFF' will display where the…
- Clock Display Toggle["Press and hold Cancel and Clock pads for 3 to 5 seconds."]
- Diagnostic Code Display Mode (H1 / MES5775BC*, MES5875BC*)["At power-up, press and hold the AUTOSET pad for 3 to 5 seconds.","Cycle through the stored codes…
- Diagnostic Code Display Mode (M2 / AES3760BC*)["At power-up, press and hold the AUTOSET pad for 3 to 5 seconds.","Cycle through the stored codes…
- Factory Default Reset["Press and hold Cancel and Keep Warm pads for 3 to 5 seconds."]
- Oven Temperature Adjustment Mode["Press BAKE pad.","Enter 550 on the digit-pad.","Immediately press and hold BAKE pad for 3 to 5…
- Quick Test Mode (H1 / MES5775BC*, MES5875BC*)["Press and hold CANCEL and BROIL pads simultaneously for 3 to 5 seconds.","Once the control has…
- Quick Test Mode (M2 / AES3760BC*)["Power up the unit (must enter within first 5 minutes after power up).","Press and hold CANCEL and…
- Sabbath Mode["Hold CLOCK button for 3 to 5 seconds to activate Sabbath mode."]
- Temperature Display Toggle (°F/°C)["Press and hold Cancel and Bake pads for 3 to 5 seconds."]
Full entry steps, exit procedures, and test sequences are available in Max.
Related Maytag range models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass