Model reference
Maytag MGR5751BDS18
Range
6 documents18 error codes18 service modes
Available documentation
Service Manual
- Maytag Amana 30 Inch Freestanding Gas Range Service Manual69 pg
- Service Manual - 1602678569 pg
- Service Manual - 30" Freestanding Gas Ranges69 pg
Bulletin
- Technical Bulletin - TDC-0096-B-French Oven Door Handles Breaking2 pg
Service Flash
- Technical Bulletin - TDC-0096-B Oven Door Handles Breaking_TDC-0096-B2 pg
Other
- TDC 0096 B2 pg
MyPros+ Max
Diagnose your Maytag MGR5751BDS18.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (18)
CodeMeaning
1c1cShorted key detected on the control circuit board.1c31Cancel key circuit problem1c4cMicro communication failure1c5cVcc or ground voltage error at test point on control board.1c6cEEPROM error1c7cControl not calibrated1c8cCooking program error1d11Runaway oven temperature (650°F) detected with door unlocked (M1) or always…1d21Runaway oven temperature (950°F) detected with door locked (M1 only).3d11Oven temperature sensor open3d21Oven temperature sensor shorted4d11Door position switch not closed when door is locked (M1 only).4d51Door switch circuit failure9d11Door latch will not lock when it should be locked (M1 only).9d21Door latch will not unlock when it should be unlocked (M1 only).9d31Unlock state unknown9d41Unlock state unknown9d51Lock switch not locked or unlocked (M1 control only).Service modes (18)
- M1 12/24 Hour Clock TogglePress and hold CANCEL and DELAY pads for 3 to 5 seconds
- M1 Child LockoutPress and hold CANCEL and COOK & HOLD pads for 3 to 5 seconds until beep sounds.
- M1 Clock Display Toggle On/OffPress and hold CANCEL and CLOCK pads for 3 to 5 seconds.
- M1 Diagnostic Code DisplayWithin 30 seconds of powering up the unit, press and hold More+ pad
- M1 Diagnostic Code Display Mode1
- M1 Factory Default ResetPress and hold CANCEL and KEEP WARM pads for 3 to 5 seconds.
- M1 Oven Temperature Adjustment1
- M1 Quick Test Mode1. Within 5 minutes of power-up, press and hold Cancel and Broil pads for 3 to 5 seconds. 2. Once…
- M1 Sabbath ModeHold CLOCK pad for 3 to 5 seconds to activate
- M1 Temperature Display Toggle (°F/°C)Press and hold CANCEL and BAKE pads for 3 to 5 seconds
- NSC Diagnostic Code DisplayWithin 30 seconds of powering up the control, press and hold More+ pad for 3 to 5 seconds
- NSC Diagnostic Code Display Mode1
- NSC Keypad LockoutPress and hold Cancel and Timer pads for 3 to 5 seconds
- NSC One-Watt Standby ModePress and hold Cancel and Less- pads for 3 to 5 seconds.
- NSC Oven Temperature Adjustment1
- NSC Quick Test Mode1. Within 5 minutes of power-up, press and hold Cancel and Broil pads for 3 to 5 seconds. 2. Once…
- NSC Sabbath ModeHold Clock pad for 3 to 5 seconds to activate
- NSC Temperature Display Toggle (°F/°C)Press and hold Cancel and Bake pads for 3 to 5 seconds
Full entry steps, exit procedures, and test sequences are available in Max.
Related Maytag range models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass