mypros+
Model reference

Maytag MGR5752BDW

Range

7 documents39 error codes44 service modes

Available documentation

Tech Sheet

  • Tech Sheet - 1602668312 pg
    Covers this model

Service Manual

  • 30" Freestanding Gas Ranges Base Manual69 pg
    Covers this model
  • Maytag Amana 30 Inch Freestanding Gas Range Service Manual69 pg
    Covers this model
  • Service Manual - 1602678569 pg
    Covers this model
  • Service Manual - 30" Freestanding Gas Ranges69 pg
    Covers this model
  • Failure Codes and Wiring Diagrams for Maytag Heritage Gas & Electric Ranges124 pg
    Covers this model
  • FAILURE CODES AND WIRING DIAGRAMS for MAYTAG HERITAGE GAS & ELECTRIC RANGES124 pg
    Covers this model
MyPros+ Max

Diagnose your Maytag MGR5752BDW.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (39)

CodeMeaning
1c1cShorted key detected on the control circuit board.1c2cKeyboard tail disconnected or keyboard loop has improper value.1c31Cancel key circuit problem1c32Cancel key circuit problem (cancel key improper value) on lower oven cavity.1c4cMicro communication failure1c5cVcc or ground voltage issue at test point on control board.1c6cEEPROM error1c7cControl not calibrated1c81Cook profile corrupted in EEPROM for upper/single oven cavity (CRC invalid).1c82Cook profile corrupted in EEPROM for lower oven cavity (CRC invalid).1c8cCooking program error1d11Runaway oven temperature (650°F) detected with door unlocked (M1) or at any…1d12Runaway temperature (650°F) detected with door unlocked on lower oven cavity.1d21Runaway oven temperature (950°F) detected with door locked (M1 control only).1d22Runaway temperature (950°F) detected with door locked on lower oven cavity.3d11Oven temperature sensor open3d12Temperature sensor failure (open) on lower oven cavity3d21Oven temperature sensor shorted3d22Temperature sensor failure (short) on lower oven cavity3d41Meat probe shorted3d51Meat probe not calibrated4d11Door position switch not closed when door is locked (M1 control only).4d12Door switch position failure4d21No Reverse Airflow Fan rotation (no/low RPM) on upper/single oven cavity.4d22No Reverse Airflow Fan rotation (no/low RPM) on lower oven cavity.4d31Reverse Airflow Fan state error4d32Reverse Airflow Fan state error4d41High Reverse Airflow Fan rotation (high RPM) on upper/single oven cavity.4d42High Reverse Airflow Fan rotation (high RPM) on lower oven cavity.4d51Door switch circuit failure
View all 39 error codes
4d52Door switch circuit failure9d11Door latch will not lock9d12Door latch will not lock on lower oven cavity9d21Door latch will not unlock9d22Door latch will not unlock on lower oven cavity9d31Unlock state unknown9d32Door latch both locked and unlocked simultaneously on lower oven9d41Unlock state unknown9d51Lock switch not locked or unlocked (M1 control only).

Service modes (44)

  • 24-Hour Clock TogglePress and hold CANCEL and DELAY pads for 3 to 5 seconds
  • Child LockoutPress and hold CANCEL and COOK & HOLD pads for 3 to 5 seconds until beep sounds.
  • Clock Display TogglePress and hold CANCEL and CLOCK pads for 3 to 5 seconds.
  • Diagnostic Code DisplayPress and hold the MORE+ pad within 30 seconds of powering up the unit
  • Diagnostic Code Display Mode (H1 Controls)Press and hold AUTOSET pad for 3 seconds at power-up.
  • Diagnostic Code Display Mode (H3 Controls)Press and hold Upper Cancel and Timer for 3 to 5 seconds within 5 minutes of power up.
  • Diagnostic Code Display Mode (NSC Controls)Press and hold the More + pad for 3 to 5 seconds when powering up the unit (within 60 seconds of…
  • Factory Default ResetPress and hold CANCEL and KEEP WARM pads for 3 to 5 seconds.
  • Faults Access (EOC III Controls)1
  • M1 12/24 Hour Clock TogglePress and hold CANCEL and DELAY pads for 3 to 5 seconds
  • M1 24-Hour Clock Toggle["Press and hold CANCEL and DELAY pads for 3 to 5 seconds.","Press MORE+ or LESS- pads to change…
  • M1 Child Lockout["Press and hold CANCEL and COOK & HOLD pads for 3 to 5 seconds until beep sounds."]
  • M1 Clock Display Toggle["Press and hold CANCEL and CLOCK pads for 3 to 5 seconds."]
  • M1 Clock Display Toggle On/OffPress and hold CANCEL and CLOCK pads for 3 to 5 seconds.
  • M1 Diagnostic Code DisplayWithin 30 seconds of powering up the unit, press and hold More+ pad
  • M1 Diagnostic Code Display Mode["Within 30 seconds of powering up the unit, press and hold the More+ pad.","Cycle through stored…
  • M1 Factory Default Reset["Press and hold CANCEL and KEEP WARM pads for 3 to 5 seconds."]
  • M1 Oven Temperature Adjustment["Press BAKE pad.","Enter 550 on the digit pad.","Immediately press and hold BAKE pad for 3 to 5…
  • M1 Quick Test Mode["Power up the unit.","Within 5 minutes of power-up, press and hold Cancel and Broil pads…
  • M1 Sabbath Mode["Initiate desired bake function first.","Hold CLOCK pad for 3 to 5 seconds to activate Sabbath…
  • M1 Temperature Display (°F/°C)["Press and hold CANCEL and BAKE pads for 3 to 5 seconds.","Press MORE+ or LESS- pads to change…
  • M1 Temperature Display Toggle (°F/°C)Press and hold CANCEL and BAKE pads for 3 to 5 seconds
  • NSC Diagnostic Code DisplayWithin 30 seconds of powering up the control, press and hold More+ pad for 3 to 5 seconds
  • NSC Diagnostic Code Display Mode["Within 30 seconds of powering up the unit, press and hold the More+ pad for 3 to 5…
  • NSC Keypad Lockout["Press and hold Cancel and Timer pads for 3 to 5 seconds.","Press More+ or Less- pads to change."]
  • NSC One-Watt Standby Mode["Press and hold Cancel and Less- pads for 3 to 5 seconds."]
  • NSC Oven Temperature Adjustment["Press Bake pad.","Enter 550 on the digit-pad.","Immediately press and hold Bake pad for 3 to 5…
  • NSC Quick Test Mode["Power up the unit.","Within 5 minutes of power-up, press and hold Cancel and Broil pads…
  • NSC Sabbath ModeHold Clock pad for 3 to 5 seconds to activate
  • NSC Temperature Display Toggle (°F/°C)Press and hold Cancel and Bake pads for 3 to 5 seconds
  • One-Watt Standby Mode (NSC Controls)Press and hold Cancel and Less
  • Oven Temperature Adjustment1
  • Quick Test1. Within 5 minutes of power-up, press and hold Cancel and Broil pads simultaneously for 3 to 5…
  • Quick Test Mode (EOC III Controls)1
  • Quick Test Mode (H1 Controls - Convection Model)1
  • Quick Test Mode (H1 Controls - Non-Convection Model)1
  • Quick Test Mode (H2/H2.5 Controls)1
  • Quick Test Mode (H3 Controls)1
  • Quick Test Mode (M1/M2 Controls)1
  • Quick Test Mode (NSC Non-Self Clean Controls)1
  • Sabbath ModeHold CLOCK pad for 3 to 5 seconds to activate Sabbath mode
  • Service Mode (EOC III Controls)1
  • Temperature Display Toggle (°F/°C)Press and hold CANCEL and BAKE pads for 3 to 5 seconds
  • Test Mode (UH Controls)1

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass