Model reference
Maytag MGR5875QDB1
Range
9 documents27 error codes9 service modes
Available documentation
Tech Sheet
- Gas Freestanding Range Technical Information10 pg
Bulletin
- Technical Bulletin - LP Conversion Kits1 pg
- Technical Bulletin - Gas Valve Regulator1 pg
- Technical Bulletin - TDC-0075-B Gas Valve Regulator1 pg
- Technical Bulletin1 pg
- Technical Bulletin - Automatic Oven Light Operation1 pg
- Technical Bulletin - TDC-0096-B-French Oven Door Handles Breaking2 pg
Service Flash
- Technical Bulletin - TDC-0096-B Oven Door Handles Breaking_TDC-0096-B2 pg
Other
- TDC 0096 B2 pg
MyPros+ Max
Diagnose your Maytag MGR5875QDB1.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (27)
CodeMeaning
1c1cShorted key detected on control circuit board.1c2cKeyboard tail disconnected; keyboard loop reading improper value.1c31Cancel key circuit problem; cancel key reading improper value.1c32Cancel key circuit problem; cancel key reading improper value.1c6cEEPROM error; no response from EEPROM after 3 tries.1c7cControl not calibrated; calibration value out of range1c8cCooking program error; CRC invalid.1d11Runaway temperature (650°F) detected with door unlocked; sensor resistance >…1d12Runaway temperature (650°F) detected with door unlocked; sensor resistance >…1d21Runaway temperature (950°F) detected with door locked; sensor resistance > 2787…1d22Runaway temperature (950°F) detected with door locked; sensor resistance > 2787…3d11Temperature sensor open; sensor resistance reads infinite Ohms.3d12Temperature sensor open; sensor resistance reads infinite Ohms.3d21Temperature sensor shorted; sensor resistance reads 0 Ohms.3d22Temperature sensor shorted; sensor resistance reads 0 Ohms.4d11Door switch position failure; door switch not closed when door is locked during…4d12Door switch position failure; door switch not closed when door is locked during…4d21No reverse airflow fan rotation detected (no or low RPM) during clean or cook.4d31Reverse airflow fan is on when it should be off.4d51Door switch circuit failure; door switch not reading open or closed during…4d52Door switch circuit failure; door switch not reading open or closed during…9d11Latch will not lock; lock switch not reading closed when it should be locked.9d12Latch will not lock; lock switch not reading closed when it should be locked.9d21Latch will not unlock; unlock switch not reading closed when it should be…9d22Latch will not unlock; unlock switch not reading closed when it should be…9d31Latch state unknown; both locked and unlocked switches reading simultaneously.9d32Latch state unknown; both locked and unlocked switches reading simultaneously.Service modes (9)
- 24 Hour Clock TogglePress and hold Cancel and Favorite pads for 3 seconds.
- Child Lock OutPress and hold Cancel and Cook & Hold pads for 3 seconds
- Clock Display Toggle (On/Off)Press and hold Cancel and Clock pads for 3 seconds.
- Diagnostic Code Display ModePress and hold AUTOSET pad for 3 seconds at power-up
- Factory Default ResetPress and hold Cancel and Keep Warm pads for 3 seconds.
- Oven Temperature Adjustment1
- Quick Test ModePress and hold CANCEL and BROIL pads simultaneously for 3 seconds
- Sabbath ModeHold CLOCK pad for 3 seconds to activate
- Temperature Display Toggle (F/C)Press and hold Cancel and Bake pads for 3 seconds.
Full entry steps, exit procedures, and test sequences are available in Max.
Related Maytag range models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass