mypros+
Model reference

Maytag MGR8800FZ0

Range

11 documents38 error codes43 service modes

Available documentation

Tech Sheet

  • Tech Manual - W1138291416 pg
    Covers this model
  • tech sheet w11382213 reva2 pg
    Covers this model
  • W11565451A - Service Technician Technical Sheet2 pg
    Covers this model
  • Tech Sheet - W10538797 - Rev A8 pg
    Covers this model
  • Tech Sheet - W10538798 - Rev A (FR)8 pg
    Covers this model

Service Manual

  • SERVICE MANUAL - Whirlpool®, Maytag®, KitchenAid®, Kenmore®, JennAir®, IKEA®, and Amana® Ranges104 pg
    Covers this model
  • Technical Manual - Cooking Surface Temperature Limits12 pg
    Covers this model

Bulletin

  • DIP - W107149136 pg
    Covers this model

Quick Reference

  • Freestanding Gas Range Control Guide18 pg
    Covers this model

Installation Guide

  • Freestanding Gas Range Owner's Manual56 pg
    Covers this model
  • Installation Instructions40 pg
    Covers this model
MyPros+ Max

Diagnose your Maytag MGR8800FZ0.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (38)

CodeMeaning
F1EEPROM communication error or internal control failure (Maxwell/MRC control).F1-E0EEPROM communication error.F1-E5Sensor out of range.F1-E7PCB thermistor open or shorted.F1E0Internal board failure (LCC/LCX control).F1E1A/D error (LCC/LCX control).F1E2A/D error (LCC/LCX control).F1E5Sensor out of range.F1E7PCB thermistor open or shorted.F2Keypad disconnected, stuck key, or cancel key error (Maxwell/MRC control).F2-E0Keypad disconnected.F2-E1Stuck key.F2-E2Cancel key error.F2E0Shorted key (LCC/LCX control).F2E1Stuck KeypadF2E2Cancel key error.F3-E0Main oven temperature sensor open or shorted.F3-E2Warming drawer sensor open or shorted.F3E0Oven sensor opened (LCC/LCX control)F3E1Oven sensor shorted (LCC/LCX control).F3E2Bake/Broil range over temperature (LCC/LCX control).F3E3Clean range over temperature (LCC/LCX control).F5-E0Door and switches do not agree (Clean modeF5-E1Door latch not operating (Clean modeF5E0Door and door position switch do not agree during Clean mode (Maxwell/MRC…F5E1Door latch not operating during Clean mode (LCC/LCX control).F5E2Door and door position switches do not agree during Clean mode (LCC/LCX…F6-E1Over temperature during cook mode.F6-E2Over temperature during clean mode.F6-E3Over temperature in warming drawer.
View all 38 error codes
F6E0Oven User Interface lost communication between UI and ACU (Indigo control).F6E1Over temperature cookF6E2Over temperature during clean mode (Maxwell/MRC control).F6E3Over temperature in warming drawer (Maxwell/MRC control).F6E4Oven User Interface UI and ACU state status mismatch (Indigo control).F8E0Cooling fan speed too lowF8E2Cooling fan speed too highF9E0Mis-wired house or range (Maxwell/MRC control).

Service modes (43)

  • Auto Test1
  • Auto Test - Maxwell/MRC Controls["Enter Diagnostics Mode (CANCEL>CANCEL>START)","Press the 'up' arrow, '+' key, or '3' key to…
  • Auto Test (Maxwell/MRC Controls)1
  • Component Activation (Indigo Controls)From Diagnostics Menu, select Component Activation
  • CONTROL RESET["Enter diagnostic mode
  • Diagnostic / Service Mode["Press CANCEL > CANCEL > START.","Display shows 'TEST ON' with oven cavity temperature and door…
  • Diagnostics Mode - Indigo Controls (Option 1)["Press HOME>FAVORITES>LIGHT (repeat this sequence three times in a row)","The warning will be…
  • Diagnostics Mode - Indigo Controls (Option 2)["Press TOOLS>INFO>SERVICE AND SUPPORT","Press the Diagnostics button for 1 minute","Press…
  • Diagnostics Mode - LCC/LCX Controls["Press CANCEL","Press CANCEL","Press START (all within a 5-second period)","Initial display shows…
  • Diagnostics Mode - Maxwell/MRC Controls["Press CANCEL","Press CANCEL","Press START (all within quick succession)","Display shows 'TEST ON'…
  • Diagnostics Mode (Auto Test)["Press CANCEL","Press CANCEL","Press START","Display shows 'TEST ON' with cavity temperature and…
  • Diagnostics Mode (Indigo Controls) - Option 1Press HOME > FAVORITES > LIGHT, repeat three times in a row
  • Diagnostics Mode (Indigo Controls) - Option 2Press TOOLS > INFO > SERVICE AND SUPPORT
  • Diagnostics Mode (LCC/LCX Controls)Press CANCEL > CANCEL > START within a 5-second period. Scroll through settings with up arrow…
  • Diagnostics Mode (Maxwell/MRC Controls)Press CANCEL > CANCEL > START within 5 seconds
  • Diagnostics Mode / Service Mode EntryPress CANCEL > CANCEL > START
  • Diagnostics Test Mode Relay Checks (LCC/LCX Controls)While in Diagnostics Mode
  • DISPLAYEnter Service Mode (CANCEL > CANCEL > START), scroll to step 5 (DISPLAY).
  • ENG MODEEnter Service Mode (CANCEL > CANCEL > START), scroll to step 2 (ENG MODE)
  • ENG MODE (Engineering Mode)["Enter diagnostic mode
  • FAULTSEnter Service Mode (CANCEL > CANCEL > START), scroll to step 7 (FAULTS).
  • RELAY USAGEEnter Service Mode (CANCEL > CANCEL > START), scroll to step 8 (RELAY USAGE).
  • Service Diagnostic Mode (Auto Test)1
  • Service Diagnostic Test Mode1
  • Service Mode - AUTO TEST["Press CANCEL>CANCEL>START to enter Service Mode","Scroll to step 9 (AUTO TEST)"]
  • Service Mode - DISPLAY["Press CANCEL>CANCEL>START to enter Service Mode","Scroll to step 5 (DISPLAY)"]
  • Service Mode - ENG MODE["Press CANCEL>CANCEL>START to enter Service Mode","Scroll to step 2 (ENG MODE)","Press START to…
  • Service Mode - FAULTS["Press CANCEL>CANCEL>START to enter Service Mode","Scroll to step 7 (FAULTS)"]
  • Service Mode - RELAY USAGE["Press CANCEL>CANCEL>START to enter Service Mode","Scroll to step 8 (RELAY USAGE)"]
  • Service Mode - TEST MODE["Press CANCEL>CANCEL>START to enter Service Mode","Scroll to step 3 (TEST MODE)"]
  • Service Mode - TEST ON["Press CANCEL","Press CANCEL","Press START"]
  • Service Mode - USAGE["Press CANCEL>CANCEL>START to enter Service Mode","Scroll to step 1 (USAGE)"]
  • Service Mode - VERSION["Press CANCEL>CANCEL>START to enter Service Mode","Scroll to step 4 (VERSION)"]
  • Service Modes - Maxwell/MRC Controls (TEST ON, USAGE, ENG MODE, TEST MODE, VERSION, DISPLAY, FAULTS, EXTERNAL FAULTS, RELAY USAGE, AUTO TEST)["Press CANCEL>CANCEL>START to enter Service Mode","Use up arrow/+ key/3 key to scroll through…
  • Service Modes Menu (Maxwell/MRC Controls)Press CANCEL>CANCEL>START. Scroll through modes using up arrow/'+'/3 key
  • Temperature Adjustment1
  • Temperature Adjustment Mode["Press OVEN LIGHT for 5 seconds (display shows current offset or 0° if no offset)","Press…
  • TEST MODEEnter Service Mode (CANCEL > CANCEL > START), scroll to step 3 (TEST MODE)
  • TEST MODE (Relay Test)["Enter diagnostic mode
  • TEST ON - Relay Checks (Maxwell/MRC Controls)From Diagnostics Mode (CANCEL>CANCEL>START), at TEST ON display
  • TEST ON (Relay Checks)Upon entering Service Mode (CANCEL > CANCEL > START), 'TEST ON' is displayed
  • USAGEEnter Service Mode (CANCEL > CANCEL > START), scroll to step 1 (USAGE).
  • VERSIONEnter Service Mode (CANCEL > CANCEL > START), scroll to step 4 (VERSION).

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass