mypros+
Model reference

Maytag MGS5875BD

Range

11 documents27 error codes6 service modes

Available documentation

Service Manual

  • Gas Slide-In Range Service Manual55 pg
    Covers this model

Bulletin

  • Installation Bulletin - IDC-0009-B Metal Leveling Leg1 pg
    Covers this model
  • Bulletin d'installation - IDC-0009-B-French Metal Leveling Leg1 pg
    Covers this model
  • Installation Bulletin - IDC-0009-B Metal Leveling Leg1 pg
    Covers this model

Service Flash

  • Technical Bulletin - TDC-0096-B Oven Door Handles Breaking_TDC-0096-B2 pg
    Covers this model

Installation Guide

  • Installation Bulletin - IDC-0013-B Filler Kit2 pg
    Covers this model
  • Bulletin d'installation - Trousse de panneau latéral IDC-0014-B-F2 pg
    Covers this model
  • Installation Bulletin - IDC-0014-B Side Panel Kit2 pg
    Covers this model
  • Installation Bulletin - Slide-In Ranges Side Panel Kit Installation Instructions2 pg
    Covers this model

Other

  • TDC 0099 B1 pg
    Covers this model
  • TDC 0096 B2 pg
    Covers this model
MyPros+ Max

Diagnose your Maytag MGS5875BD.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (27)

CodeMeaning
1c1cShorted key1c2cKeyboard tail disconnected1c31Cancel key circuit problem1c32Cancel key circuit problem (H1 models)1c6cEEPROM error1c7cControl not calibrated1c8cCooking program error1d11Runaway temperature (650°F) with door unlocked1d12Runaway temperature (650°F) with door unlocked (H1 models, lower oven)1d21Runaway temperature (950°F) with door locked1d22Runaway temperature (950°F) with door locked (H1 models, lower oven)3d11Sensor open3d12Sensor open (H1 models, lower oven)3d21Sensor shorted3d22Sensor shorted (H1 models, lower oven)4d11Door switch position failure4d12Door switch position failure (H1 models, lower oven)4d21No reverse airflow fan rotation (no/low RPM)4d31Reverse airflow fan state (on when should be off)4d51Door switch circuit failure4d52Door switch circuit failure (H1 models, lower oven)9d11Latch will not lock9d12Latch will not lock (H1 models, lower oven)9d21Latch will not unlock9d22Latch will not unlock (H1 models, lower oven)9d31Latch state unknown9d32Latch state unknown (H1 models, lower oven)

Service modes (6)

  • H1 Diagnostic Code DisplayPress and hold Autoset 0 pad and power up the unit
  • H1 Quick Test Mode1. Press and hold Cancel and Broil pads for 5 seconds at power-up or within 5 minutes of power-up…
  • M1 Diagnostic Code DisplayPress and hold Up Arrow pad within 60 seconds of powering up the unit
  • M1 Quick Test Mode1. Press and hold CANCEL and BROIL pads for 5 seconds (must be within first 5 minutes of power up)…
  • M2 Diagnostic Code DisplayPress and hold Autoset pad for 5 seconds at power-up
  • M2 Quick Test Mode1. Press and hold CANCEL and BROIL pads for 5 seconds. 2. Once entered, release both pads. 3. Press…

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass