mypros+
Model reference

Maytag PER3725ACW

Range

8 documents36 error codes38 service modes

Available documentation

Tech Sheet

  • Tech Sheet - 16026484F (FR)10 pg
    Covers this model
  • Cuisinière électrique autoportante — Informations techniques10 pg
    Covers this model
  • Electric Freestanding Range — Technical Information8 pg
    Covers this model
  • wiringsheet-8119p095-60-fr.pdf1 pg
    Covers this model

Service Manual

  • Service Manual - Freestanding Electric Range54 pg
    Covers this model
  • Freestanding Electric Range Service Manual54 pg
    Covers this model
  • Failure Codes and Wiring Diagrams for Maytag Heritage Gas & Electric Ranges124 pg
    Covers this model
  • FAILURE CODES AND WIRING DIAGRAMS for MAYTAG HERITAGE GAS & ELECTRIC RANGES124 pg
    Covers this model
MyPros+ Max

Diagnose your Maytag PER3725ACW.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (36)

CodeMeaning
1c1cShorted key detected1c2cKeyboard tail disconnected1c31Cancel key circuit problem1c32Cancel key circuit problem (cancel key improper value) on lower oven cavity.1c4cPower micro communication failure (CRC invalid).1c6cEEPROM error1c7cControl not calibrated1c81Cook profile corrupted in EEPROM for upper/single oven cavity (CRC invalid).1c82Cook profile corrupted in EEPROM for lower oven cavity (CRC invalid).1c8cCooking program error1d11Runaway temperature (650°F) with door unlocked1d12Runaway temperature (650°F) detected with door unlocked on lower oven cavity.1d21Runaway temperature (950°F) with door locked1d22Runaway temperature (950°F) detected with door locked on lower oven cavity.3d11Oven temperature sensor open3d12Temperature sensor failure (open) on lower oven cavity3d21Oven temperature sensor shorted3d22Temperature sensor failure (short) on lower oven cavity3d41Meat probe shorted3d51Meat probe not calibrated4d11Door switch not closed when door is locked.4d12Door switch position failure4d21No Reverse Airflow Fan rotation (no/low RPM) on upper/single oven cavity.4d22No Reverse Airflow Fan rotation (no/low RPM) on lower oven cavity.4d31Reverse Airflow Fan state error4d32Reverse Airflow Fan state error4d41High Reverse Airflow Fan rotation (high RPM) on upper/single oven cavity.4d42High Reverse Airflow Fan rotation (high RPM) on lower oven cavity.4d51Door switch not open or closed4d52Door switch circuit failure
View all 36 error codes
9d11Latch will not lock9d12Door latch will not lock on lower oven cavity9d21Door latch will not unlock on upper/single oven cavity9d22Door latch will not unlock on lower oven cavity9d31Door latch both locked and unlocked simultaneously on upper/single oven9d32Door latch both locked and unlocked simultaneously on lower oven

Service modes (38)

  • 12-Hour Auto Shutoff DisableNormally the control auto-cancels all cooking and disables relay drivers 12 hours after last key…
  • 12-Hour Shutoff DisableThe control automatically cancels any cooking and disables all relay drivers 12 hours after the…
  • 12/24 Hour Clock TogglePress and hold Cancel and Delay keys simultaneously for 3 to 5 seconds. Then press More + or Less
  • 24 Hour Clock Toggle["Press and hold Cancel and Delay pads for 3 to 5 seconds.","Press More + or Less
  • 24-Hour Clock TogglePress and hold Cancel and Delay keys simultaneously for 3 to 5 seconds
  • Child Lock Out["Press and hold Cancel and Cook & Hold pads for 3 to 5 seconds until beep sounds."]
  • Child Lockout["Press and hold Cancel and Cook & Hold pads for 3 to 5 seconds until beep sounds."]
  • Child Safety LockPress and hold Cancel and Cook & Hold keys simultaneously for 3 to 5 seconds until a beep sounds.
  • Clock Display Toggle["Press and hold Cancel and Clock pads for 3 to 5 seconds."]
  • Clock Display Toggle (on/off)Press and hold Cancel and Clock keys simultaneously for 3 to 5 seconds.
  • Default Configuration ResetPress and hold Cancel and Keep Warm keys simultaneously for 3 to 5 seconds until a beep is heard.
  • Diagnostic Code Display["Must be started within 60 seconds after powering up the control.","Press and hold the More + pad…
  • Diagnostic Code Display ModeWithin 60 seconds of powering on the appliance, press and hold the More+ key
  • Diagnostic Code Display Mode (H1 Controls)Press and hold AUTOSET pad for 3 seconds at power-up.
  • Diagnostic Code Display Mode (H3 Controls)Press and hold Upper Cancel and Timer for 3 to 5 seconds within 5 minutes of power up.
  • Diagnostic Code Display Mode (NSC Controls)Press and hold the More + pad for 3 to 5 seconds when powering up the unit (within 60 seconds of…
  • Factory Default Reset["Press and hold Cancel and Keep Warm pads for 3 to 5 seconds until beep sounds."]
  • Faults Access (EOC III Controls)1
  • One-Watt Standby Mode (NSC Controls)Press and hold Cancel and Less
  • Oven Temperature Adjustment["Press Bake pad.","Enter 550 on the digit-pad.","Immediately press and hold Bake pad for 3 to 5…
  • Oven Temperature Calibration Adjustment1
  • Quick Test["Must be entered within the first 5 minutes after power up.","Press and hold Cancel and Broil pads…
  • Quick Test Mode["Must be entered within the first 5 minutes after power up.","Press and hold Cancel and Broil pads…
  • Quick Test Mode (EOC III Controls)1
  • Quick Test Mode (Factory Verification Mode)1
  • Quick Test Mode (H1 Controls - Convection Model)1
  • Quick Test Mode (H1 Controls - Non-Convection Model)1
  • Quick Test Mode (H2/H2.5 Controls)1
  • Quick Test Mode (H3 Controls)1
  • Quick Test Mode (M1/M2 Controls)1
  • Quick Test Mode (NSC Non-Self Clean Controls)1
  • Sabbath Mode["Desired bake function must be initiated before entering Sabbath mode.","Press the Clock pad for 3…
  • Service Mode (EOC III Controls)1
  • Temperature Display (°F/°C toggle)["Press and hold Cancel and Bake pads for 3 to 5 seconds.","Press More + or Less
  • Temperature Display (F/C toggle)Press and hold Cancel and Bake keys simultaneously for 3 to 5 seconds
  • Temperature Display Toggle (°F/°C)["Press and hold Cancel and Bake pads for 3 to 5 seconds.","Press More + or Less
  • Test Mode (UH Controls)1
  • Time Display TogglePress and hold Cancel and Clock keys simultaneously for 3 to 5 seconds.

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass