Model reference
Maytag PER5750LAQ
Range
2 documents27 error codes24 service modes
Available documentation
Tech Sheet
- Tech Sheet - 160235409 pg
Service Manual
- Service Manual - 1602248736 pg
MyPros+ Max
Diagnose your Maytag PER5750LAQ.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (27)
CodeMeaning
1c1cShorted key detected on control board keyboard.1c2cKeyboard tail disconnected from control board.1c31Cancel key circuit problem (cancel key improper value).1c32Cancel key circuit problem (cancel key improper value, alternate detection).1c6cEEPROM error1c7cControl not calibrated1c8cCooking program error (CRC invalid).1d11Runaway oven temperature (650°F) with door unlocked1d12Runaway oven temperature (650°F) with door unlocked (alternate detection).1d21Runaway oven temperature (950°F) with door locked1d22Runaway oven temperature (950°F) with door locked (alternate detection).3d11Oven temperature sensor open3d12Oven temperature sensor open (alternate detection).3d21Oven temperature sensor shorted3d22Oven temperature sensor shorted (alternate detection).4d11Door switch position failure4d12Door switch position failure (alternate detection).4d21No reverse airflow fan rotation (no or low RPM detected).4d31Reverse airflow fan state error4d51Door switch circuit failure4d52Door switch circuit failure (alternate detection)9d11Door latch will not lock9d12Door latch will not lock (alternate detection).9d21Door latch will not unlock9d22Door latch will not unlock (alternate detection).9d31Latch state unknown9d32Latch state unknownService modes (24)
- 24 Hour Clock Toggle["Press and hold Cancel and Delay pads for 3 to 5 seconds.","Press More + or Less
- 24 Hour Clock Toggle (H1 Control)Press and hold Cancel and Favorites pads for 3 seconds.
- 24 Hour Clock Toggle (M1 Control)Press and hold Cancel and Delay pads for 3 seconds.
- 24 Hour Clock Toggle (M2 Control)Press and hold Cancel and Favorite pads for 3 seconds.
- Child Lock Out["Press and hold Cancel and Cook & Hold pads for 3 to 5 seconds until beep sounds."]
- Child Lock Out (H1 Control)Press and hold Cancel and Cook & Hold pads for 3 seconds
- Clock Display Toggle (H1/M1/M2)Press and hold Cancel and Clock pads for 3 seconds.
- Clock Display Toggle (On/Off)["Press and hold Cancel and Clock pads for 3 to 5 seconds."]
- Diagnostic Code Display["Power up the unit.","Within 60 seconds of powering up, press and hold the More + pad.","Cycle…
- Diagnostic Code Display Mode (H1 Control)Press and hold AUTOSET pad for 3 seconds at power-up
- Diagnostic Code Display Mode (M1 Control)Press and hold Up Arrow pad and power up the unit
- Diagnostic Code Display Mode (M2 Control)Press and hold Up Arrow pad and power up the unit
- Factory Default Reset["Press and hold Cancel and Keep Warm pads for 3 to 5 seconds until beep sounds."]
- Factory Default Reset (H1/M1/M2)Press and hold Cancel and Keep Warm pads for 3 seconds.
- Oven Temperature Adjustment["Press Bake pad.","Enter 550 on the digit-pad.","Immediately press and hold Bake pad for 3 to 5…
- Oven Temperature Adjustment (H1 Control)1
- Oven Temperature Adjustment (M1/M2 Control)1
- Quick Test["Must be entered within the first 5 minutes after power up.","Press and hold Cancel and Broil pads…
- Quick Test (H1 Control)1
- Quick Test (M1 and M2 Controls)1
- Sabbath Mode["Initiate desired bake function before entering Sabbath mode.","Hold Clock button for 3 to 5…
- Sabbath Mode (H1/M1/M2)Hold CLOCK pad for 3 seconds to activate
- Temperature Display Toggle (°F/°C)["Press and hold Cancel and Bake pads for 3 to 5 seconds.","Press More + or Less
- Temperature Display Toggle (H1/M1/M2)Press and hold Cancel and Bake pads for 3 seconds.
Full entry steps, exit procedures, and test sequences are available in Max.
Related Maytag range models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass