Maytag MAH3000AWA

Available documentation

Error codes (8)

Service modes (18)

• Advertising Mode (LCD Washer)Press and hold the Favorites and Back keys simultaneously for 3 seconds.
• Advertising Mode (LED Washer)Press and hold the Heavy Soil and Cotton/Sturdy keys simultaneously for 3 seconds.
• Board Input Test (LED Washer)Enter Service Mode, then press the Hand Wash key.
• Board Output Test (LED Washer)Enter Service Mode, then press the Rinse key.
• Diagnostic Mode (LCD models)["Enter service mode first","Rotate timer dial through positions to access different diagnostic…
• Idle/Service Mode (MAH5500B/MAH6500)["With washer in Off position, press and hold the Fabric Selection button and the Options…
• Membrane Pad Check (LED Washer)Enter Service Mode, then press the Wrinkle Free key.
• Motor & Motor Control Test1
• Motor and Motor Control Test["1
• Motor and Motor Control Test (Delay Mode Test)["Set the timer knob into the delay increments.","Press the push-to-start switch to start the…
• Motor Phase Test["1
• Quick Service Cycle (LED Washer)Enter Service Mode, then press the Delicates key.
• Quick Service Test (MAH5500/MAH6500 - LCD models)["1. Turn cycle selector knob to a position.","2. Press and hold the Start/Stop button.","3. The…
• Quick Spin TestEnter Service Mode, then press Spin key (LED) or select Quick Spin Test on touch screen (LCD).
• Quick Spin Test (LCD models)["Enter service mode","Set timer to appropriate position for spin test","Washer will execute spin…
• Service Mode (LCD Washer - MAH7500)Press and hold the Back and Help keys simultaneously for 5 seconds.
• Service Mode (LED Washer - MAH5500B)Press and hold the Delicates and Heavy Soil keys simultaneously for 3 seconds.
• Service Mode (MAH5500/MAH6500 - LCD models)["Set timer to any Off position","Press and hold the Fabric Selection and Options buttons…

Full entry steps, exit procedures, and test sequences are available in Max.