Model reference
Samsung DV455EVGSWR/AA-00
Dryer
1 document12 error codes12 service modes
Available documentation
Service Manual
- Clothes Dryer Service Manual59 pg
MyPros+ Max
Diagnose your Samsung DV455EVGSWR/AA-00.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax
Error codes (12)
CodeMeaning
2EElectronic Control Problem (Over Voltage Error).AEElectronic Control Problem (Communication Error).AE3A communication error between the DR Modem and the MAIN PBA.AE4A communication error between the WIFI PBA and the MAIN PBA.AE5A communication error between the LCD PBA and the MAIN PBA.bE2Invalid state of key circuit short for 30 seconds.dERunning the dryer with door open.dFInvalid door state for more than 256 milliseconds.EtInvalid state of EEPROM communication.FEInvalid power source frequency.tEThe thermistor resistance is very low or high.tE3The resistance of the thermistor for the vent blockage detection operation is…Service modes (12)
- Cycle Count Mode (DV455*)Press the Mixed load/edbell key in Service Mode.
- Cycle Count Mode (DV457*)In service mode, press the '2' button.
- Data Display Mode (DV455*)Press the time button in service mode
- Data Display Mode (DV457*)Press the '4' button in service mode
- DR Modem Connection Test (DV457* only)Press the '5' button in service mode to perform the DR wire test.
- Service Mode (DV455*)Press Wrinkle Prevent + Temp keys for 3 seconds in normal mode until it sends out a beeping sound.
- Service Mode (DV457*) - Method 1Select Title Option '4' on Course Selection Mode, then press Extras for 3 seconds.
- Service Mode (DV457*) - Method 2Tap Segment '1' three times, tap Segment '2' two times, tap Segment '3' once on the Progress Mode.
- Software Revision Mode (DV455*)At Service Mode, press Temp until it sends out a beeping sound.
- Software Revision Mode (DV457*)If the unit enters service mode, the software version is displayed in the center top of the display…
- Touch Sensor Data Display Mode (DV455*)Once the unit enters service mode, the mode changes to touch sensor display mode automatically…
- Touch Sensor Data Display Mode (DV457*)If the '1' button is pressed in service mode, the mode changes to touch sensor data display mode.
Full entry steps, exit procedures, and test sequences are available in Max.
Related Samsung dryer models
75,000+ service documents · 20,000+ error codes · 100+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax