mypros+
Model reference

Wascomat EX12HITEK

Washer

2 documents15 error codes3 service modes

Available documentation

Service Manual

  • Operating & Maintenance Manual EX-12 Hi-tek EX-22 Hi-tek72 pg
    Covers this model
  • Operating & Maintenance Manual EX-12 Hi-tek EX-22 Hi-tek65 pg
    Covers this model
MyPros+ Max

Diagnose your Wascomat EX12HITEK.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax

Error codes (15)

CodeMeaning
ERROR IN VOLTAGEThe voltage supply to the machine is too low or too high (only certain…HIGH TEMPERATUREWater temperature has exceeded safe limits.LOW OIL LEVELOil level in the shaft bearing lubrication system container is low (only…LOW OIL-LEVELOil level in the bearing lubrication system container is low (only certain…NO HEATThe heating circuit is not functioning.NO WATER. CHECK INLET!Water is not reaching the machine; water taps may be closed or supply…NO WATER.CHECK INLET!Water is not reaching the machine during a fill cycle.OPEN CIRCUIT IN TEMP-SENSOROpen circuit detected in the temperature sensor.OPEN CIRCUIT IN TEMP.-SENSORTemperature sensor has an open circuit fault.PHASE-OR DOOR LOCK-ERRORIncorrect phase rotation detected or door lock circuit failure.PHASE-OR DOORLOCK-ERRORPhase rotation error or door lock malfunction detected.SWITCH FOR UNBALANCE DETECTION IS ONThe out-of-balance detection switch has been triggered.THE DOOR IS OPENThe door interlock detects the door is open or the door lock is not engaged.WATER IN MACHINEWater is present in the machine drum at program start.WATER LEFTWater cannot be drained within the programmed time, or the drain is blocked.

Service modes (3)

  • Built-in service program["Contact service personnel for entry procedure details."]
  • Program statistics["Select program number 00 using the digit keys.","Press PROG
  • Programming mode["Turn the key switch from RUN to PROGRAM position."]

Full entry steps, exit procedures, and test sequences are available in Max.

Related Wascomat washer models

75,000+ service documents · 20,000+ error codes · 100+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax