Model reference
Whirlpool RBS245PDB14
Oven
7 documents22 error codes9 service modes
Available documentation
Tech Sheet
- Tech Sheet - 83017576 pg
Service Manual
- Kitchenaid Whirlpool Built In Single Double Electric Wall Ovens D Models Service Manual146 pg
- Service Manual 4317164 bochniak146 pg
Installation Guide
- Installation Instructions5 pg
- Instruction Sheet1 pg
- Instruction Sheet1 pg
Other
- servicemanual 4317164.pdf146 pg
MyPros+ Max
Diagnose your Whirlpool RBS245PDB14.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (22)
CodeMeaning
F0Default F codeF1Default F-CodeF1-E0All E CodesF2Keypad is not connected, keypad held too long, or keypad is shorted.F2-E0Key held down too long, or key is shorted.F2-E1Keypad keytail not connected.F2-E5CANCEL key drive line open.F2-E6CANCEL key drive line open (grouped with E5).F3Wiring harness cavity size does not match the previously stored value (cavity…F3-E0Temperature sensor opened (R=2875 ohms by spec).F3-E1Temperature sensor shorted (R=825 ohms by spec).F3-E2Oven temp too highF3-E3Oven temp too highF4Temperature sensor open.F5Temperature sensor shorted or oven temperature is too high (runaway)F5-E0Door is open but latch is locked (door switch indicates open door while latch…F5-E1Self-clean latch will not lock or will not unlock.F6Shorted meat probe or miswired temp probe.F7Oven door latch will not lock.F8Oven door is open but latch is locked.F9Oven door latch will not unlock, or common wire (+5Vdc) to latch switch and…PFPower failure indication (not a failure of control).Service modes (9)
- Bake Temperature Offset Adjustment1
- Fahrenheit to Celsius ConversionPress the BROIL key for 5 seconds
- Fahrenheit to Celsius display changePress the BROIL keypad for 5 seconds
- Oven temperature calibrationTouch and hold the BAKE keypad for 5 seconds. The display will indicate the present oven…
- Programming Cavity Size (Self-Clean models)1. Within 60 seconds of power up, press the following keys in sequence
- Programming Cavity Size (Standard-Clean models)1. Within 60 seconds of power up, press the following keys in sequence
- Sabbath mode - Double oven1
- Sabbath mode - Single oven1
- Verify Cavity Size ProgrammingPress and hold CANCEL key for 5 seconds, then press and hold START key for 5 seconds.
Full entry steps, exit procedures, and test sequences are available in Max.
Related Whirlpool oven models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass