Whirlpool Oven Error Code F0

F0 is the default fault code on Whirlpool ovens and means no failure has been detected. It only appears when the '0' key is held for 5 seconds and no other faults are stored in the control board's memory. It is not an error indicating a broken component.

Yes. F0 indicates no fault is present, so the oven is safe to use. Simply press CANCEL to clear the display and resume normal operation. There is no underlying component failure associated with this code.

In most cases, fixing F0 costs nothing because it clears by pressing CANCEL and requires no parts. If a stuck keypad is the cause, a replacement control panel or keypad assembly typically runs $50 to $150 for the part. If the control board itself needs replacement, expect $150 to $300 or more for parts, plus labor if you hire a technician.

Press the CANCEL button to clear the F0 code from the display. No repair or part replacement is required. If the code reappears without anyone holding the '0' key, the control board may be behaving abnormally and should be inspected by a technician.

If F0 returns repeatedly without the '0' key being held, the keypad or control board may have a contact issue causing the key to register as held down. Check the keypad for stuck or damaged keys first. If the keypad appears normal, the control board may need to be replaced, which typically costs between $150 and $350 for parts and labor depending on the model.