Model reference
Whirlpool RBS245PDT13
Oven
6 documents24 error codes9 service modes
Available documentation
Tech Sheet
- TECH SHEET - 4451884 - Rev A6 pg
Service Manual
- Kitchenaid Whirlpool Built In Single Double Electric Wall Ovens D Models Service Manual146 pg
- Service Manual 4317164 bochniak146 pg
Installation Guide
- Installation Instructions5 pg
- Instruction Sheet1 pg
Other
- servicemanual 4317164.pdf146 pg
MyPros+ Max
Diagnose your Whirlpool RBS245PDT13.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (24)
CodeMeaning
F0Default F codeF1Default F-CodeF1-E0Key held down too long, or key is shorted.F1-E1Keypad keytail not connected.F1-E5CANCEL key drive line open.F1-E6Electronic control malfunction.F2Keypad is not connected, keypad held too long, or keypad is shorted.F3Wiring harness cavity size does not match the previously stored value (cavity…F3-E0Temperature sensor opened.F3-E1Temperature sensor shorted.F3-E2Oven temperature too highF3-E3Oven temperature too highF4Temperature sensor open.F5Temperature sensor shorted or oven temperature is too high (runaway)F5-E0Door is open but latch is locked (door switch indicates open door and latch…F5-E1Self-clean latch will not lock.F5-E5Self-clean temperature 550°F (288°C) not reached within 45 minutes.F5-E7Self-clean latch will not unlock.F6Shorted meat probe or miswired temp probe.F6-E0Switch pulse return line not connectedF7Oven door latch will not lock.F8Oven door is open but latch is locked.F9Oven door latch will not unlock, or common wire (+5Vdc) to latch switch and…PFPower failure indication (not a failure of control).Service modes (9)
- Bake Temperature Offset AdjustmentPress BAKE pad for 5 seconds
- Fahrenheit to Celsius ConversionPress the BROIL pad for 5 seconds
- Fahrenheit to Celsius display changePress the BROIL keypad for 5 seconds
- Oven temperature calibrationTouch and hold the BAKE keypad for 5 seconds. The display will indicate the present oven…
- Programming Cavity Size (Self-Clean models)Within 60 seconds of power up, press the following touchpads in order
- Programming Cavity Size (Standard-Clean models)Within 60 seconds of power up, press the following touchpads in order
- Sabbath mode - Double oven1
- Sabbath mode - Single oven1
- Verify Cavity Size ProgrammingPress and hold CANCEL pad for 5 seconds, then press and hold START pad for 5 seconds. The first…
Full entry steps, exit procedures, and test sequences are available in Max.
Related Whirlpool oven models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass