Model reference

Whirlpool YKEBC208KS0

Oven

6 documents28 error codes7 service modes

Available documentation

Tech Sheet

Fiche Technique - Ne Pas Jeter8 pg
Covers this model
Whirlpool Range YKEBS278DW3 Tech Sheet8 pg
Covers this model
TECH SHEET - 4451877 - Rev C8 pg
Covers this model
TECH SHEET - Whirlpool Range YKEBS278DW38 pg
Covers this model

Service Manual

Dimension Guide1 pg
Covers this model

Installation Guide

Installation Instructions10 pg
Covers this model

MyPros+ Max

Diagnose your Whirlpool YKEBC208KS0.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·Whirlpool Oven

F0 on my Whirlpool YKEBC208KS0

M+

No fault present (default code).

From Tech Sheet W14641892, p.24:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure control board supply voltage at test points. Expected: 12 VDC and 5 VDC.

3.Inspect all connectors on the main control for corrosion or backed-out pins.

Part WPW10804018

Electronic control board

Error codes (28)

CodeMeaning

F0No fault present (default code)F1Electronic control module failure.F1-E0Prolonged key press or short circuit on keypad.F1-E1Keypad ribbon connector not connected.F1-E5Cancel key compression line open.F2Oven temperature sensor open or short circuit, or oven temperature too high…F2-E0Oven temperature sensor open circuit.F2-E1Oven temperature sensor short circuit.F2-E2Oven temperature too high F2-E3Oven temperature too high F3Meat probe thermistor failure (short circuit).F3-E0Temperature sensor opened.F3-E1Meat probe thermistor short circuit.F3-E2Oven temperature too high (over 575°F / 301°C in Cook mode).F3-E3Oven temperature too high (over 950°F / 510°C in Clean mode).F4Door latch system failure F4-E0Door is open but latch is locked (door switch closed indicating open, latch…F4-E1Self-clean latch cannot lock.F4-E5Self-clean temperature of 550°F (288°C) not reached within 45 minutes.F4-E7Self-clean latch cannot unlock.F5Electronic control module failure (all E sub-codes indicate control module…F5-E0Door is open but latch is locked (door switch closed indicating open door and…F5-E1Self clean latch will not lock.F5-E5Self clean temperature (550°F / 288°C) not reached within 45 minutes.F5-E7Self clean latch will not unlock.F6Return pulse line from switch not connected F6-E0Return pulse line not connected.SABOven is in Sabbath Mode.

Service modes (7)

Bake temperature calibration offsetPress and hold BAKE key for 5 seconds
Bake Temperature Offset Adjustment1
Cavity Size ProgrammingWithin 60 seconds of power up, press the following keys in order
Fahrenheit to Celsius Conversion1
Fahrenheit/Celsius temperature display togglePress and hold BROIL key for 5 seconds to switch to Celsius (C displayed)
Fault Code Display (No Fault)Press and hold '0' key for 5 seconds
Sabbath mode disableIf SAB symbol is displayed, press and hold the '6' key for 5 seconds to deactivate Sabbath mode.

Full entry steps, exit procedures, and test sequences are available in Max.

Related Whirlpool oven models

78,000+ service manuals · 160,000+ error codes · 55+ brands

$29/month · Cancel anytime · Or $9.95 3-day pass