Model reference
Wolf DUALFUEL4860
Range
1 document14 error codes8 service modes
Available documentation
Service Manual
- Service Manual Dual Fuel 48 6013 pg
MyPros+ Max
Diagnose your Wolf DUALFUEL4860.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax
Error codes (14)
CodeMeaning
01Door Lock or Unlock Switches not sensed within 60 seconds while driving the…02Over temperature occurs when the oven reaches a temperature of 630°F for an…03Open circuit detected on RTD Oven Sensor.04Shorted circuit detected on the RTD Sensor.07SPI Communication lost from ECH to the Control Board as reported by Control…08EEPROM checksum is incorrect, checked at power up.09Meat probe being sensed as shorted.0BAnalog to Digital error during calibration phase.0CCommunication lost with oven controller.0EPower relay shorted, sensed as closed when should be openErrError code has been logged into oven controller.HotOven temperature too hot for cooking mode selected; a mode was attempted while…PFUnit had a power failure.SAbUnit is in Sabbath feature.Service modes (8)
- Diagnostic Mode1
- Diagnostic Mode - Element Testing1
- Diagnostic Mode - Fans and Motors Testing1. Enter Diagnostic Mode. 2. Turn oven control knob bezel or press key on ECH to activate fan/motor
- Diagnostic Mode - Probe Testing1
- Diagnostic Mode - RTD Testing1
- Field Option Mode - 12/24 Hour Clock1
- Field Option Mode - Fahrenheit/Celsius1
- Field Option Mode - User Preference Offset (UPO)1
Full entry steps, exit procedures, and test sequences are available in Max.
Related Wolf range models
75,000+ service documents · 20,000+ error codes · 100+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax