Frigidaire Dishwasher Not Draining?

If your Frigidaire dishwasher has water sitting in the bottom after a cycle, the cause is usually something you can fix in a few minutes. Here’s where to start.

Step-by-step troubleshooting

1
Remove and clean the filter

Frigidaire dishwashers have a removable filter in the bottom of the tub. Turn the filter handle counterclockwise and lift out both the upper and lower filter components. Rinse them under hot running water with a soft brush. Food buildup here is the most common drain issue.

2
Inspect the drain hose

The drain hose runs from the pump to the garbage disposal or drain connection under the sink. Check for kinks or compression where the hose passes through the cabinet. On Frigidaire dishwashers, the hose connects to the pump with a spring clamp that can loosen over time.

3
Check the air gap or high loop

Make sure the drain hose is installed with either an air gap device or a high loop under the counter. Without this, water can siphon back into the dishwasher from the sink drain, making it appear as though the dishwasher isn’t draining.

4
Run the disposal before starting

If your Frigidaire dishwasher drains into a garbage disposal, always run the disposal with water for 15–20 seconds before starting a dishwasher cycle. A partially clogged disposal will prevent the dishwasher from draining.

5
Test the drain pump

Start a cycle and listen during the drain phase. You should hear the pump motor running. If you hear nothing, the pump motor may have failed. If you hear it running but water doesn’t drain, the impeller may be broken or the check valve is stuck.

Need the part? Get it delivered fast.

The part you likely need: Drain pump motor or drain hose

Buy This Part on AppliancePartsPros.com

OEM replacement parts with fast shipping & 365-day returns

Want to diagnose it yourself?

Get access to the service manual, wiring diagrams, and AI diagnostics for your exact model. 7 days free.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Still stuck?

Hire a professional

Some repairs need a qualified tech. Search “Frigidaire dishwasher repair near me” to find local service.

Are you a repair tech? Get service manuals & diagnostic tools on MyPros+ →

When to call a professional

If the control board isn’t sending power to the drain pump (you can test this with a multimeter at the pump connector), the main control board may need replacement. This is a more expensive repair and worth getting a professional diagnosis before ordering parts.

STOP GUESSING·Start verifying

Start diagnosing faster today.

$29/month · Cancel anytime · Or $9.95 3-day pass

Get Started