Ariston Washer Error Code F14

F14 on an Ariston AWD combination washer-dryer means the dryer heating element circuit is open, indicating no electrical continuity through the element. The control board cannot confirm that the heating element is functional, so it halts the drying cycle and displays this code. This fault applies only to AWD models that include an integrated drying function.

The washing function of the unit may still operate when F14 is present, but the drying cycle will not generate heat. Continuing to run drying cycles without a functioning heating element will not produce results and may stress other components. It is best to resolve the fault before relying on the drying function.

A power reset will typically clear the F14 code temporarily, but it will return as soon as the machine attempts a drying cycle and detects the open heating element circuit again. The code indicates an actual component failure, not a software or sensor glitch, so a reset alone will not resolve the underlying problem. The heating element and associated circuit components must be tested and repaired.

A knowledgeable DIYer can diagnose F14 by performing a continuity test on the heating element using a multimeter. If the element tests open, replacing it is a feasible repair for someone comfortable working with appliance electrical components. However, because the repair involves high-voltage parts, those unfamiliar with electrical safety procedures should hire a qualified technician.

Repair costs vary depending on which component has failed and local labor rates. A replacement heating element typically costs between $30 and $90 for the part alone, while thermal fuses are generally less expensive at $5 to $25. If professional labor is required, total repair costs including diagnosis and installation commonly range from $100 to $250.