Ariston Washer Error Code F16

F16 on an Ariston washer indicates a non-functioning basket (drum) block condition. The machine has detected that the drum block mechanism is not operating as expected during the cycle. The control system halts operation to prevent mechanical damage. Diagnosis begins with inspection of connector card CNC.

No, you should not attempt to run the washer while the F16 error is active. The machine has stopped the cycle because the drum block function is not confirmed, and continuing to operate it could cause mechanical damage to the drum assembly or other internal components. Resolve the fault before resuming use.

A reset may temporarily clear the F16 code, but if the underlying fault in the drum block system or CNC connector has not been resolved, the error will return once the machine attempts to run through the affected part of the cycle. A reset is not a fix and should only be used as part of a diagnostic process, not as a substitute for proper repair.

If you are comfortable with basic appliance diagnostics, you can start by checking that the CNC connector card is securely seated and free of corrosion or visible damage. However, if the fault persists after reseating the connector, further diagnosis involving wiring continuity testing and mechanical inspection of the drum block is best handled by a qualified technician.

Repair costs vary depending on the root cause. If the issue is simply a loose connector, the cost may be limited to a service call fee, typically in the range of $75 to $150. If the drum block mechanism or control board needs replacement, parts and labor combined could range from $150 to $400 or more depending on parts availability and local labor rates.