ASKO Dryer Error Code Max Program Time

This error means the dryer ran for more than 200 minutes without completing the drying cycle. When that limit is reached, the machine automatically stops and clears the program. It indicates the dryer was unable to remove moisture efficiently, typically due to blocked airflow, poor room ventilation, or a heavily saturated load entering the drum.

The dryer is designed to stop operation and clear the program when this limit is reached, so it is not running in a dangerous state when the error appears. However, repeatedly hitting this error without resolving the underlying cause means the dryer is consistently underperforming. Address the airflow and ventilation issues before running another cycle, and have the heating components inspected if basic troubleshooting does not resolve the problem.

If the issue is resolved by clearing a blocked air intake or improving room ventilation, there is no parts cost involved. If a heating element needs replacement, parts and labor costs typically range from around $150 to $350 depending on the component and your location. A faulty thermostat or temperature sensor repair tends to fall in the $100 to $250 range. Diagnostic fees vary by service provider and may be applied toward the repair total.

In many cases, yes. Start by turning the machine off and letting it rest for at least 30 minutes before restarting. Check that the external air intake is clear of any obstructions, and make sure the laundry room has good ventilation. If your load was washed at a low spin speed, run an additional high-speed spin in the washing machine before drying. If the error continues after addressing these points, a technician should inspect the heating element and temperature sensors.

Switching the machine off for at least 30 minutes and then restarting is one of the first recommended steps. This reset allows the dryer to clear the error and attempt a new cycle. However, if the conditions that caused the timeout, such as blocked air passage or poor ventilation, have not been corrected, the error is likely to return during the next cycle.