mypros+
Error code reference

Dacor Range Error Code F5

ERC self-diagnostic failure.

Dacor codesDacor range codes

ERC self-diagnostic failure.

First step from the service manual

Replace the ERC.

The complete diagnostic procedure includes additional test steps, resistance specifications, wiring diagram references, and component test points.

MyPros+ Max

Get the full diagnostic procedure for F5.

  • Step-by-step tests with expected resistance, voltage, and continuity values
  • Wiring diagram references and connector pinouts from the OEM service manual
  • Verified part numbers when replacement is required
Get the full procedure

$29/month · Cancel anytime · Or $9.95 3-day pass

What F5 means on a Dacor range

The F5 error code on a Dacor range indicates an ERC (Electronic Range Control) self-diagnostic failure. The ERC is the central control board that manages all range functions, including oven temperature regulation, bake and broil element control, clock and timer functions, and user interface communication. When the ERC runs its internal self-check and detects that its own circuitry or memory has failed to operate within acceptable parameters, it generates the F5 fault code and halts normal operation to prevent unsafe or unpredictable behavior.

This type of fault is internal to the ERC itself, meaning the board has identified a problem within its own logic, memory, or processing circuits. Unlike sensor-related fault codes that point to external components, F5 is a self-referential diagnostic failure. Common contributing factors include power surge damage to the board's internal components, capacitor degradation over time, corrupted firmware or onboard memory, or physical damage to the board from heat or moisture exposure within the control cavity.

Because the failure originates within the ERC, the standard corrective action is replacement of the control board. There are no external sensors or wiring harnesses to inspect first in this case. Before replacing the board, technicians should verify the incoming voltage to the range is within spec and that no visible burning or arcing is present on the board's connectors, but the F5 code itself points directly to the ERC as the failed component.

Source: manufacturer service documentation.

Common causes of F5

  1. 01

    Internal ERC board failure

    Part replacement

    The ERC has detected a fault in its own circuitry, memory, or processing components during self-diagnostics. This is the primary and most direct cause of an F5 code, and the board typically cannot recover on its own.

  2. 02

    Power surge damage

    Part replacement

    A voltage spike from a utility surge or lightning event can damage the internal components of the ERC board. Inspect the board for visible burn marks or damaged traces as a sign of surge-related failure.

  3. 03

    Corrupted onboard memory or firmware

    Wiring / connection

    The ERC's onboard memory can become corrupted over time or after an interruption in power, causing the self-diagnostic routine to fail. A hard reset by cutting power to the range for several minutes may be attempted first, though it rarely resolves a true F5 fault.

  4. 04

    Heat or moisture damage to the control board

    Part replacement

    Prolonged exposure to high heat or moisture inside the control cavity can degrade board components and solder joints over time. Look for discoloration, corrosion, or swollen capacitors on the board surface.

  5. 05

    Loose or corroded board connectors

    Wiring / connection

    Though less common with an F5 self-diagnostic code, poorly seated or corroded wiring harness connectors at the ERC can sometimes contribute to erratic board behavior. Inspect all connectors to the board before ordering a replacement.

See the test procedure for each cause

Frequently asked questions about F5

What does F5 mean on a Dacor range?
The F5 code on a Dacor range indicates that the ERC, or Electronic Range Control, has failed its own internal self-diagnostic check. This means the main control board has detected a fault within its own circuitry and is reporting itself as defective. The range will typically stop functioning normally when this code appears. Replacing the ERC is the recommended corrective action.
Can I fix the F5 error on my Dacor range myself?
A homeowner with intermediate DIY skills can attempt to replace the ERC board, but the repair involves working with line voltage components and is best handled by a qualified technician. Before ordering a replacement board, try disconnecting power to the range for a few minutes to see if the error clears, though this rarely resolves an F5 fault. If the code returns immediately after restoring power, the ERC board will need to be replaced.
Is it safe to use my Dacor range when the F5 error is displayed?
It is not recommended to continue using the range while an F5 code is active. The ERC controls critical functions including temperature regulation and element shutoff, and a failed control board can lead to unpredictable operation. Discontinue use of the range until the ERC has been replaced and the fault is cleared.
How much does it cost to fix a Dacor F5 error?
The cost to repair an F5 error on a Dacor range depends primarily on the price of the replacement ERC board and the cost of labor if a technician is hired. ERC boards for Dacor ranges typically range from $150 to $400 or more depending on the model, and professional labor can add $100 to $200 on top of that. Getting a repair estimate before proceeding is advisable, especially on older units where the repair cost may approach the value of the appliance.
Will resetting my Dacor range clear the F5 error code?
Resetting the range by cutting power at the breaker or unplugging the unit for several minutes is worth attempting, but it rarely clears a true F5 fault. Because F5 is generated by the ERC's own self-diagnostic routine detecting an internal board failure, the code will typically return immediately once power is restored. A persistent F5 code after a reset confirms that the ERC board needs to be replaced.

Related Dacor range codes

All Dacor range codes
View all 23 Dacor range codes

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass