mypros+
Error code reference

Dacor Range Error Codes

24 error codes documented with diagnostic procedures.

Have your model number? Get codes specific to your unit.
F-7Door failure codeF0Shorted or jammed input device detected, possibly caused by shorted wires or a defective…F1System Watchdog Circuit alarmF10Shorted element relay, or intermittent temperature sensor or loose sensor wiring.F11Shorted key (button) on keypad membrane.F13Control panel failure.F14Defective power board.F15Defective power board.F2Heating Mode High Temperature alarmF20Data cable between relay board and control panel loose or defective, or defective control…F3Shorted Oven Sensor alarmF30Shorted temperature sensor or shorted temperature sensor wiring.F31Open temperature sensor or open temperature sensor wiring.F32Data cable between relay board and control panel loose or defective, defective membrane…F4Open Oven Sensor alarmF5ERC self-diagnostic failure.F6EEPROM checksum errorF8Door locking switch alarmF9Door lock problem detected by the control panel controller board.F90Data cable between relay board and control panel loose or defective, defective membrane…F95Cables to door latch loose or defective, defective door latch assembly, or defective…Oven Knob Light blinksControl board failure or 12-hour bake time-out was exceeded.Oven On Indicator Light blinks once every 2 secondsOven temperature sensor is open (open circuit).Oven On Indicator Light blinks once every 5 secondsOven temperature sensor is shorted.

Get the full diagnostic procedure for any code

Step-by-step tests, expected values, wiring diagram references, and verified part numbers.

Get Started $9.95 3-day pass

$29/month for unlimited access to all brands and Max AI diagnostics.

More Dacor error codes

Common questions

How do I find the error code on my Dacor Range?
Most Dacor ranges show the code directly on the control panel display. If your model has no display, it can be read by entering diagnostic mode with the key sequence for your model. The full procedures include model-specific instructions for reading codes.
Are these codes specific to my model?
The codes here apply broadly to Dacor ranges. Meanings and diagnostic steps can vary by model and production year, so enter your model number for model-specific information and procedures.
What do I do if my code is not listed?
Some codes are model-specific or only appear in diagnostic mode. Enter your model number to get codes specific to your unit, or contact us. We update the database continuously from manufacturer service documentation.
How much does it cost to access the full diagnostic procedures?
A 3-day pass is $9.95 one-time and gives full access to all brands, codes, and procedures. Monthly access is $29/month with unlimited access to everything including Max AI diagnostics.