GE Refrigerator Error Code 00

Code 00 on a GE refrigerator means no faults are present in the control board's memory. It is a status confirmation, not an error. The board displays 00 during diagnostic mode to indicate all monitored systems are operating within normal parameters. No repair action is needed when this code appears.

Code 00 presents no safety concern. It is a normal status indicator confirming that the refrigerator's control board has detected no fault conditions across its monitored systems. You can continue using the appliance normally when this code is displayed.

There is no repair cost associated with code 00 because it indicates no fault is present. If you are experiencing a performance issue alongside this code and a technician is needed to perform a hands-on inspection, diagnostic service call fees typically range from $75 to $150 depending on your location and service provider.

No repair is required for code 00 itself. However, if you entered diagnostic mode because the refrigerator was not cooling properly or exhibiting unusual behavior, code 00 means the board has not logged a specific fault. In that case, a physical inspection of components like the evaporator fan, condenser fan, and door seals would be the recommended next step.

Code 00 does not need to be cleared because it is not an error condition. Resetting the refrigerator by cycling power will simply exit diagnostic mode. If you are trying to clear a different code that previously appeared, a power reset may replace it with 00, confirming the fault log has been cleared.