GE Washer Error Code 0E

The 0E code indicates a lid lock fault. The washer has detected that the lid lock will not lock, will not unlock, or is reporting a locked state while the lid is physically open. The machine stops operation to prevent running with an unsecured lid. Diagnosis starts with checking the lid switch continuity and the lid lock position circuit at the IMC.

No, you should not run the washer while this code is active. The lid lock system is a safety feature that prevents the lid from opening during high-speed spin cycles. If the lock is not functioning correctly, the washer could run with an unsecured lid, creating a risk of injury. Address the fault before resuming use.

If the repair is a simple fix such as clearing debris from the plunger or reseating a connector, there may be no parts cost at all. A replacement lid lock assembly typically costs in the range of $25 to $80 for the part. If you hire a technician, expect to add a service call fee and labor, which commonly brings the total into the range of $100 to $200 depending on your area.

Some causes of the 0E code are DIY-friendly. You can inspect the lid lock plunger to confirm it slides freely, check the wiring harness for visible damage, and test the lid switch and lock position circuits for continuity with a multimeter. If the lock assembly itself has failed internally, replacing it requires basic hand tools and is within reach for most experienced DIYers.

A power reset may temporarily clear the code if it was triggered by a one-time glitch, but if there is an underlying mechanical or electrical fault in the lid lock system, the code will return as soon as the washer attempts to lock the lid again. A reset is a reasonable first step, but persistent return of the code means the root cause needs to be diagnosed and repaired.