GE Washer Error Code CC

The CC code on a GE washer means the motor temperature is too high. The washer's Inverter Motor Control system detected that the motor overheated and shut down the machine to prevent damage. This is a protective fault, not necessarily a sign of a broken component. Allowing the washer to rest and performing a reset is the recommended first step.

Start by unplugging the washer for 30 seconds to reset the IMC board, and visually inspect the motor for any signs of overheating like discoloration or a burnt smell. If the washer was running heavy loads back to back, allow it to cool for 30 minutes before restarting. If the code keeps coming back, the motor bearings, motor windings, or the IMC board may need to be tested and potentially replaced by a qualified technician.

Repair costs depend on the root cause. If the issue is simply heat buildup from overloading, there is no parts cost involved. IMC board replacement typically ranges from $150 to $350 in parts and labor, while motor replacement can range from $200 to $500 or more depending on the specific model and local labor rates. Getting a diagnostic inspection first helps avoid replacing components unnecessarily.

A reset can clear the CC code if the motor has had time to cool down. Unplug the washer from the outlet and wait at least 30 seconds before plugging it back in. This resets the IMC board and clears the stored fault. If the code returns quickly after restarting, the underlying cause such as a motor or IMC issue needs to be diagnosed.

It is not safe to continue running the washer while the CC code is active. The code indicates the motor has reached a dangerously high temperature, and forcing operation could cause permanent motor damage or create a fire risk. Let the machine cool, perform a reset, and investigate the cause before resuming laundry.