GE Washer Error Code PF

PF stands for Power Failure on a GE washer. It means the machine detected that power was cut off while a wash cycle was actively running, and power has since been restored. The code is an informational alert, not necessarily an indicator of a broken component. You can typically press Start to resume the interrupted cycle or select a new one.

Yes, in most cases clearing the code is straightforward. Pressing Start resumes the cycle from where it left off, or you can cancel and restart a new cycle. If a true power outage was the cause, the code should not return once normal power is stable. Repeated resets that do not prevent the code from coming back suggest an underlying electrical supply issue.

If the cause is simply a power outage or a tripped breaker, there is no repair cost involved. Replacing a damaged power cord typically runs in the range of $20 to $60 for parts, plus labor if you hire a technician. If the main control board requires replacement, costs can range from $150 to $400 or more depending on the specific model and labor rates in your area.

To clear a PF code, press the Start button to resume the interrupted cycle, or press Cancel and select a fresh cycle. If the code reappears without an obvious power outage, check your wall outlet, circuit breaker, and power cord for loose connections or signs of damage. Persistent PF codes with no external cause may point to a failing control board.

The PF code itself is not a safety hazard. It is an informational alert that a power interruption occurred during a cycle. However, if the root cause is a faulty outlet, a tripped breaker from an overloaded circuit, or a damaged power cord, those electrical issues should be addressed promptly to prevent potential hazards. Have any wiring or outlet problems evaluated by a qualified electrician.