Jenn-Air Oven Error Code FEE8-0

FEE8-0 indicates an open circuit in the main cavity convection heating element, labeled convect element 1. The Appliance Control Unit detected that no current is flowing through the element circuit. This is most commonly caused by a burned-out element or a loose wiring connection at the element or ACU. The oven cannot operate the convection heating function until the fault is resolved.

The convection heating function will not operate correctly with this fault active, so convection-based cooking modes will be unreliable or non-functional. Bake or broil modes that use different elements may still function, but operating the oven with a known open circuit fault and potentially damaged wiring or a burned element is not recommended. It is best to resolve the fault before continued use to avoid the risk of further electrical damage.

If only a wiring connection needs to be reseated, the cost is primarily a service call fee, typically in the range of $75 to $150 depending on your area. If the convection element needs replacement, parts costs generally range from $50 to $200 depending on the specific model, with additional labor charges if a technician performs the work. Total repair costs for an element replacement by a professional commonly fall in the $150 to $400 range.

A knowledgeable DIYer can start by checking that all wiring connections at the convection element and the ACU are firmly seated, since a loose connector is sometimes the only issue. If connections are secure, the convection element should be visually inspected for burns or separation and tested with a multimeter for continuity. Replacing a convection element is a moderate-difficulty repair that requires disconnecting power, accessing the element inside the oven cavity, and transferring the wiring. If you are not comfortable working with oven wiring, a qualified technician should handle the repair.

Disconnecting power to the oven briefly may temporarily clear the displayed code, but the fault will return as soon as the ACU re-checks the convection element circuit and detects the open circuit again. A reset does not repair a failed element or a damaged connection. The underlying cause must be identified and corrected for the error to clear permanently.