Maytag Dishwasher Error Code 9-2

The 9-2 code indicates a diverter position problem on select Maytag dishwasher models. The diverter is the component that routes water to different spray arms during the wash cycle. The control board triggered this fault because it could not confirm the diverter moved to the correct position. This issue can stem from a failed motor, a jammed disc, a bad sensor, or a wiring problem.

It is not recommended to continue running the dishwasher while this fault is active. If the diverter is not functioning correctly, water may not reach all spray arms, resulting in poorly cleaned dishes. In some cases, a stuck or failed diverter can also place extra stress on the wash pump. Address the fault before resuming normal use.

A reset may temporarily clear the code, but if the underlying diverter problem is not resolved, the fault will return when the dishwasher runs again and the control board attempts to move the diverter. A reset is useful for ruling out a one-time electronic glitch, but a recurring 9-2 code requires physical inspection and repair of the diverter system.

A knowledgeable DIYer can attempt this repair by inspecting the diverter assembly for debris or physical damage and checking wiring connections. However, replacing the diverter motor or position sensor requires disassembling the lower portion of the dishwasher and some comfort working with electrical components. If you are unsure, a qualified appliance technician can diagnose and resolve the fault safely.

Repair costs vary depending on which component has failed. A replacement diverter motor or assembly typically costs somewhere in the range of $30 to $100 for the part alone. If you hire a technician, total repair costs including labor generally fall in the range of $100 to $250 depending on your location and the specific model.